Connection Point for Tekonsha Brake Controller Wiring Harness # 3050-P, 2004 and Newer Nissan Titan

Question

Question:

i have a tekonsha primus iq brake controler i was wondering if you knew how to wire to nissan titan factory pig tail

asked by: Fred

0

Expert Reply:

The Tekonsha Brake Controller Wiring Harness, # 3050-P, that fits the 2004 and newer Nissan Titan plugs into a harness that is already on the vehicle. This harness will be located under the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.

The wiring functions of this harness are as follows:

White = ground
Black = 12 volt power
Blue = brake controller output
Red = stop light

expert reply by: Michael H

0

Answer 1

We have not had the opportunity to do a brake controller installation on a 2023 Nissan Frontier yet. But if the plug is located in the same place as the 2022 model year, then the plug will be tucked behind the kick plate located to the left of the…

view full answer...

Answer 2

From what I'm seeing it looks like the parts that are compatible with the 2022 Frontier are also compatible with a 2023 Nissan Frontier. So for your application I recommend using the following: Draw-Tite Trailer Hitch Receiver - #75282…

view full answer...

Answer 3

From what I can find on the 2022 Nissan Frontier, the plug for the brake controller that will let you use a harness like the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3050-P is located just above the OBD connector, taped tight…

view full answer...

Answer 4

The Tekonsha Plug-In Wiring Adapter #3050-P that you referenced is the correct harness to install a brake controller like the Tekonsha Prodigy P3 #90195 on your 2017 Nissan Pathfinder. We do not have a picture available of the factory plug on your…

view full answer...

Answer 5

It is not unusual for time-delayed type brake controllers to make a slight humming or buzzing noise, but if what you are experiencing is louder than that, it points to either a fault within the controller itself (such as a relay) or a wiring issue.…

view full answer...

Answer 6

Hey Scott, congrats on your new 2020 Nissan Titan SV 2WD! I definitely recommending installing the Air Lift LoadLifter 5000 Air Helper Springs #AL57331 instead of an RAS kit just because you get more adjustability out of the air bags. They do require…

view full answer...

Answer 7

Yes, to use the Bauer Products Manger Door Lock for Horse Trailers #BA95FR in a right hand configuration you'd just have to flip the latch so that the locking mechanism is on the right hand side.

view full answer...

Answer 8

Yes the brake shoes part #AKBRKR-S-10 will work as replacements for Truryde 10 inch brake assemblies for a 3,500 lb axle.

view full answer...

Answer 9

The Dexter Electric Trailer Brake Assembly w/ Parking Brake - 10" - Left Hand - 3,500 lbs #K23-086-00 is the left hand replacement you are seeking. If you want the matching set, you can use the Dexter Electric Trailer Brake Kit w/ Parking Brakes…

view full answer...

Answer 10

Thanks for the photos and information. You will want the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs #AKEBRK-35-SA for self adjusting brakes that you won't need to check periodically to…

view full answer...

Answer 11

Hey Les, the Draw Tite hitch part #DT55MR would be a solid 2 inch hitch option for your 2024 Toyota Sienna that would have plenty of towing capacity. I looked up your towing capacity and it can tow up to 3,500 lbs. To install a brake controller like…

view full answer...

Connection Point for Tekonsha Brake Controller Wiring Harness # 3050-P, 2004 and Newer Nissan Titan

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching