TorkLift SuperHitch Original Trailer Hitch Installation - 2008 Dodge Ram Pickup Video

When we had the chance to install the Torklift hitch part #TLD1111-30 on a short bed truck like your 2023 Ram 3500 we did not have to modify the spare mount so I would not anticipate that being an issue. If you check out the install video link you…

Yes, the TorkLift SuperHitch Magnum Trailer Hitch Receiver #TLD1111-30 will fit your 2024 Ram 3500 long bed dually. This hitch fits both the short bed and long bed including dually and single rear wheels. It will replace your factory hitch.

The interior lights of your trailer would be powered by the 12 volt accessory circuit on the 7-way of your 2010 GMC Sierra. You will want to check the 1:00 position of the 7-way on your truck with a circuit tester like part #PTW2993 to verify if…

According to my Torklift contact, the #TLR3503 rear tire downs you mentioned are indeed the correct tie downs for your 2003 Ford F350 with 8 foot bed.

The correct Torklift Rear Camper Tie Down you need is the part #TLR3503 for your 2007 Ford F-350 with a Torklift Superhitch Original hitch installed.

I have a solution for you, but the TorkLift #TLD3109 are not compatible with with the SuperHitch #TLD1102 since the new SuperHitch's side plates are going to occupy the same spot where those old tie downs were previously installed. For this…

for your 2013 Ford F-150 the TorkLift SuperHitch Hero Trailer Hitch Receiver - Custom Fit - Class IV - Dual 2" Receivers #TLF1005H will partner with the factory hitch on your truck. It is designed for 6-1/2 foot bed trucks which is what it…

Depending on what truck you have the only extenders we have that would work for your 7,000 pound horse trailer would be The TorkLift SuperTruss Hitch Extension #TLE1524. This extender is 24 inches long and has a sturdy steel construction that has a…

There are campers for truck beds that do hang past the rear bumper quite a bit like you mentioned which is why you see a lot of talk about 36 inch and 48 inch long extensions. That said, since yours is only 24 inch you're best off going with the…

Based on your picture the linkage from the frame to the sway bar would be in the way for Curt trailer hitch #C15409. But not to worry because there is a hitch that accounts for a Hellwig sway bar for a 2003 Dodge Ram 2500 with factory hitch. It is…

You will need to remove the factory trailer hitch from your 2019 Ram 3500 to install the TorkLift SuperHitch Magnum Trailer Hitch Receiver #TLD1111-30. I have attached a cutout of what the SuperHitch Magnum looks like assembled for you to get an idea…

Even if you have a factory installed hitch on your 2008 Dodge Ram 3500, you can still use Curt hitch #C15809. The Curt hitch will fit beneath the factory hitch and provide you with a 2-1/2 inch receiver. I have included a link to the installation…