etrailer.com Trailer Hitch Installation - 2012 Honda CR-V Video

I definitely have some options so that you can use your Yakima Hold-Up EVO Bike rack #Y02480, but the reason Yakima does not recommend using an adapter with this bike rack is because most hitch adapters reduce the weight capacity of your hitch by…

We do have a photo of the Curt Hitch, part #C13119, on a 2012 Honda CR-V and I have posted it on the page. The most visible part will be the receiver opening and the front of the round crossbar. I have also linked the installation detail for this…

For your 2014 Honda CR-V I highly recommend the Curt Class III Trailer Hitch Receiver #C13119 for a couple of reasons. All of the Class III custom hitches (I recommend going with a Class III not only for the extra capacity but for the larger 2"…

The drivers side bolts will not bolt through the appearance panel. There will be an 8-1/2 inch by 4-1/4 inch cutout in the appearance panel for the drivers side bolts. This cutout will give you enough room to bolt the hitch on and leave the…

BMWs and Hondas are very different vehicles so you would need a different hitch for the 2013 Honda CR-V to carry your Thule bike rack. You would want the Draw Tite Hitch part #75742 as this is a 2 inch hitch confirmed to fit your vehicle that would…

I'm not sure which year your Honda CR-V is but I saw you looked at the trailer hitch receiver that fits the CR-V from 2012 to 2016 so I checked a manual for the 2016 model. It states, on page 353, that the maximum towing capacity is 1,500 pounds…

The Draw-Tite Max-Frame Trailer Hitch Receiver part #75742 which is a fit for a 2012 Honda CR-V weighs about 28 lbs.

Sounds like the fuse of the red fuse holder isn't installed in the harness to activate it. Without this the entire harness will not have power. There is also another fuse that needs to get installed under the dash. It is a 10 amp fuse that gets…

The towing capacity for your 2012 Honda CR-V is 1500-lbs. This really limits the items you are able to tow with your vehicle. The trailer hitch I recommend for your Honda is the Draw-Tite Max-Frame Trailer Hitch, part #75742. This is a Class llll…

Thank you for the photo of your Specialized Vado bike's front fork area which shows the fender and fork bridge. A wheel-mount rack such as the RockyMounts MonoRail Solo 1 Bike Platform Rack #RKY10007 will work for your Vado if you remove the…

Rola discontinued their line of bike racks a while ago so while I do have a solution for you to continue carrying your bike, I unfortunately don't have a replacement part for you. Instead I recommend swapping your bike rack out to the RockyMounts…

The rear hatch on a Chrysler Pacifica should be fine as far as clearance goes when using the RockyMounts MonoRail Solo Bike Rack for 1 Bike #RKY10007 as long as there isn't a bike loaded up. You may need to tilt the rack away but you won't…