Trailer Hitch Installation - 2011 GMC Sierra - Curt Video

Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part #19286, will use a 1-7/8 inch socket. A…

You will need to use a cheater bar on the end of the wrench to get enough leverage to loosen the nut on the ball on ball mount #C45036. Chances are the crescent wrench has a wide and flat handle so you will likely need to go to a hardware store to…

I'd recommend the Curt Class IV receiver hitch, part #14301. The hitch has a 10,000 lb towing/1000 lb tongue weight capacity which might be more than you need for that particular trailer, but it'll have plenty of capacity to spare in…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

It sounds like you are wanting the 7-way and 4-way in the bed of your 2011 Chevy Silverado and just the 7-way at the bumper. For this I recommend the 5th Wheel/Gooseneck Wiring Harness #41157. To change the plug from just the 7-way to the 7- &…

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

The Tow Ready 2 Inch Hitch Ball, part #63845, you have referenced needs to be torqued to 250 foot pounds. It is recommended to frequently check that the ball is tightened to these specifications. If you are meaning the mounting bolts that are used to…

From what I understand of the 2010 Chevy Silverado, you first will need to release the connector and housing from the bumper. Pull it out, wiring and all, just enough that you have a little room to work. The housing should then just be able to be…

Both the part #SR1020 and #S80510 are great options for a roof rack on a pop up camper. In situations like this I like to let our customers decide as they are the ones who are out there using the racks. The Swagman has more reviews that are overall…

We recommend that all trailer tires be inflated to the max psi stated on the sidewall of the tire. If the tire is under inflated, the weight capacity is lowered to an unknown amount for that tire. Although running lower air pressures can improve the…

Yes, the Curt Class IV Trailer Hitch Receiver, item #14301, will fit your 2010 Chevrolet Silverado Crew Cab, as long as the vehicle has the OEM bumper and OEM tailgate installed correctly. I have provided a link to instructions for you to review. We…

The Curt Class IV 2 Inch Hitch #14301 does not bolt to the bumper of your 2008 Chevrolet Silverado. It will bolt to the frame rails of your vehicle. You will need to remove the spare tire to install the hitch, bolt the hitch to the frame rails, and…