Trailer Hitch Installation - 2010 Hyundai Santa Fe Video

Yes both the Curt Hitch part #C13073 and the Draw Tite part #75684 which fit your 2012 Kia Sorento fit with a full size spare. I'd say the Curt gives easier access to it so it would be what I'd go with.

I spoke with my contact at Curt Mfg. and he said that trimming of the rear fascia should not be required for the 2010-2011 Santa Fe or 2011 Sorento vehicles. I have provided a link to installation instructions for you to review and a photo of the…

To install the Draw-Tite Class III Max Frame Receiver Hitch #75684 that you referenced there are 2 bolts per side used for installation on your 2012 Hyundai Santa Fe. You will not need to drill any holes in the trailer hitch for installation, the…

Is the spare tire carrier you are referring to a factory option, or is it something you installed aftermarket? The Curt hitch #C13073 may work, as a space saver tire carrier is visible in the installation pictures, but it does have a closer fit than…

The etrailer.com Trailer Hitch #E98841 does fit your 2014 Hyundai Santa Fe Sport with a spare tire, though it can be tricky in order to get it back into position. You (or your friend) may need to angle the tire in and out, and use a bit of force to…

You are correct, the trailer hitch is rated higher than the 2013 Honda CR-V but you still have to go by the weight capacities of the vehicle since they are lower. So you will want to stay within the manufacturers 1500 pound limit, even though the…

From the research I did the easiest way to determine if you have a tow package would be to check to see if your 2009 Hyundai Santa Fe has a transmission cooler mounted in front of the radiator. A transmission cooler looks basically like a miniature…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…