Muffler is Touching Vertical Plate on Curt Trailer Hitch Receiver # C11265

Question

Question:

what can i do if my muffler touch at the vertical plate on my hitch. the rubber of muffler expend when is hot and the muffler go back and touch the plate. i just have 1/4 inch space between the muffler and the vertical plate.

asked by: Kevin

0

Expert Reply:

Due to vehicle manufacturers having a loose tolerance for mounting the hangers that suspend the exhaust system, occasionally people will run into this issue when installing a hitch. Because of this, we have come up with a help article that lists a few solutions that could correct the problem. I have attached this article for you.

expert reply by: Leah S

0

Answer 1

We have the Curt hitch part #C13163 that fits your 2019 Mitsubishi Outlander non-PHEV but the #C13398 only fits the PHEV models.

view full answer...

Answer 2

For your 2018 Mitsubishi Outlander we have the Curt Class III hitch part #C13398 as a confirmed fit. This is a 2 inch hitch with plenty of towing capacity. Then for trailer wiring I recommend the Tekonsha kit part #118482 because the converter box…

view full answer...

Answer 3

The correct Curt Trailer Hitch Receiver for a 2016 Mitsubishi Outlander is part #C13163 or part #C13079 if you have a sport model. The rear bumper fascia and exhaust are different on the sport models which is why there is a different trailer hitch…

view full answer...

Answer 4

I have a solution for you, but the Curt #C13079 is only a confirmed fit on the Mitsubishi Outlander Sport models. Instead, you'll want to use the Curt #C13163, which is confirmed for the Outlander (non-Sport and non- Plug-in Hybrid vehicles).…

view full answer...

Answer 5

We have a Curt hitch that fits your 2019 Mitsubishi Outlander SE with the part #C13398 but the part number you referenced only fits the Outlander Sport models.

view full answer...

Answer 6

I have a way you can carry a bike rack with your 2019 Mitsubishi Outlander PHEV but there aren't any hitches that fit the PHEV models like what you have. So instead your best option is a trunk mounted bike rack like the Yakima Fullback 2 bike…

view full answer...

Answer 7

I have a couple of options that will allow you the ability to carry a bike on your 2002 Mercedes-Benz CLK Class. I would take a look at the Hollywood Racks Expedition 2 Bike Trunk Carrier #HRF6-2. It is a good carrier that is a confirmed fit for your…

view full answer...

Answer 8

The CURT trailer hitch, #C11815, will not cause you to remove or relocate the muffler on your 2000 Mercedes C280, with 202 Chassis as long as the muffler is in the factory location. The hitch attaches to the bottom of the frame rails and has backing…

view full answer...

Answer 9

I went out to the warehouse and found from the top of the mounting brackets to the bottom of the safety chain loops (which will be the lowest thing on the hitch) of the Curt #C11265 is about 7-5/8 inches. If you check out the linked instructions or…

view full answer...

Answer 10

Our best option for you would be the Curt hitch part #C11265. It's hitch opening is very recessed under the bumper and sits very close the bumper horizontally as well. I attached a picture that shows how far it is recessed for you to check out as…

view full answer...

Answer 11

Curt requires the strap to provide extra support for when the vehicle goes over rough pavement or experiences a sudden shock like hitting a pothole. Draw-Tite and Hidden Hitch feel that this isn't necessary with their hitches. Because the strap…

view full answer...

Answer 12

As long as your Outlander isn't the plug in hybrid (PHEV), I'd recommend the #118482 for vehicles without the factory tow package or #118277 for vehicles with the tow package. If your vehicle has the tow package, it will have the tow package…

view full answer...

Muffler is Touching Vertical Plate on Curt Trailer Hitch Receiver # C11265

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching