Trailer Hitch Installation - 2006 Acura TL - Draw-Tite Video

I did some checking and it looks like the Draw-Tite Sportframe Trailer Hitch #24755 that you referenced will fit on a 2006 Acura TL with a factory A-Spec lip kit. I also found out that Acura does not recommend you tow at all with this vehicle and I…

You'd need to go with the tire part #TT48012C as it's only option for 12 inch wheel that has an 81 mph speed rating and then for a matching wheel part #AM20124 which has the 4 bolt pattern you need. We also don't have a way to mount them…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Although they have the same weight capacity, I'd rather see you use the Curt Class I hitch, part #11321. Rather than bolting to the underside of the trunk pan like the Draw-Tite, the Curt hitch bolts to the underside of the rear bumper beam which…

To carry bikes on your 2004 Acura TL, I'd recommend going with the Draw-Tite #24755 hitch over the Curt #11321 model. Curt's warranty stipulates that an extra stabilizing strap #18050 be used with non-trailer loads on their Class I hitches,…

Yes, as long as you do not exceed the towing and tongue weight capacity of the Draw-Tite #24755 you will be fine. Draw-Tite tests their hitches on vehicles to ensure that they fit and are safe to use. The tongue weight capacity of the hitch is 200…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…