Trailer Brake Controller Installation - 2008 Honda Odyssey 90885 Video

I have exactly what you need to add a 7-way trailer connector to a 2016 Honda Odyssey. For this, you'll need to start with a 4-way trailer connector and I recommend the T-One Vehicle Wiring Harness part #118521 which is plug-n-play. Then you…

When determining the amount of rise/drop ball mount you'd need the two dimensions you need are the distance from the top of the hitch opening to the ground and from the bottom of the trailer coupler when it's sitting level. The difference…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The parts needed and steps taken to install a brake controller, like the Tekonsha Prodigy P3 #90195, on your 2016 Honda Odyssey will really depend on what they are wiring for your 7-Way. If they have wired all of the functions then you will simply…

On your 2005 Honda Odyssey with a Draw-Tite Class III 2 Inch Hitch, part #75270, the recommended ball mount is the Draw-Tite Ball Mount, part #2753. It has a 2-3/4 inch rise or a 4 inch drop. You will also need the Pin and Clip, part #PC3, to attach…

We have all the parts you will need to tow a small popup camper with your 2015 Honda Odyssey. The trailer hitches for your vehicle are rated for 3,500 pounds but you have to go by what the manufacturer states for your vehicle. If Honda states the…

I will be glad to help you out with that. You have the Primus Brake Controller, part #TK90160 so that is taken care of. If you have a 4-way connector on your vehicle you will need the Universal Installation Kit for Trailer Brake Controller, part…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

I looked up your specific vehicle and the green wire will be the positive wire and the black the ground. So you will connect your red wire on your backup camera to the green wire using a Quick Splice Wire Connector - Tan - 14-18 AWG (Qty 1) #564.

On a 7-Way connector the suggested minimum wire gauge for the White (ground) wire, the Red or Black (power) wire, and the Blue (brake power) wire is 12 gauge. The minimum wire gauge for the remaining Green (right turn/brake) wire, the Yellow (left…

For your 12V wiring to your 7-way, we have people running many different things off that 12V wire. 12 gauge or even better 10 gauge ensures that the power is transferred timely and accurately. We have a kit for brake controllers and 12V wiring for…

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…