Tekonsha T-One Vehicle Wiring Harness Installation - 2017 Honda Pilot Video

The etrailer Trailer Hitch Receiver #e98840 that fits your 2018 Honda Pilot is an aftermarket hitch and not an OEM hitch, and adding aftermarket parts for your vehicle will not affect the warranty at all. In regards to warranty, adding a hitch is…

All of the hitches we offer including the #e98840 won't be able to fit a 20 inch spare with the hitch installed. So you have a couple options. You could put the spare in the rear cargo area (you probably won't want to do that), you…

Actually all of the 2017 Honda Pilots are going to be pre-wired for trailer wiring so all you would need is the part #118760 which will plug right in like in the video link I attached.

Installing the trailer wiring on your 2019 Honda Pilot is a pretty straightforward process; if you can install the etrailer Trailer Hitch #e99044 on your Pilot I'm very confident you can also install the T-One Vehicle Wiring Harness #118760.…

On your 2019 Honda Pilot, the blue wire and quick connect of harness #118760 should have a mating quick connect in the rear cargo area if you have the backup sensors. It plugs in to the mating vehicle connector, next to the main tow package connector…

There is a difference between a 7-way round and and 7-way rv blade connector. If you take a look at the accompanying photo, which is from our linked article on trailer wiring you can see that the connector on the left has blade-style pins while the…

The trailer hitches for the 2016 Honda Pilot, such as #e98840, are pretty straight forward as the videos suggest. I have also linked the installation instructions for you so you can see all the steps. The wiring harness #118760 has a 4-Way flat…

I don't know what the OEM torque specs were on your hitch but I trust you did your homework. I did confirm that when installing the aftermarket etrailer Trailer Hitch Receiver #e98840 on your 2017 Honda Pilot the torque specs can always be found…

By installing a hitch on the 2021 Honda Pilot, the tailgate sensor will likely be blocked. Luckily, Honda does offer an adapter kit that moves the sensor to accommodate the installation of a trailer hitch. The Honda part number is I08L91-TG7-100C ;…

The hardware that is used to install hitches on your 2019 Honda Pilot like the Curt #C13146 is M14x1.50 so that is the size you'd need.

You do not have to replace your sensors directly, but at the least you are going to want to install the Horst Miracle Probe Sensors #T21301VP next to your old sensors. They are positioned in a way that allows the reading to be as accurate as…

The Tow Ready T-One Wiring Harness, #118427, will plug into the white trailer tow plug on your 2010 Honda CR-V, located behind the drivers side rear interior trim panel. You will also need to attach the white ground wire on the wiring harness to the…