SumoSprings Maxim Rear Helper Springs Installation - 2016 Ford F-53 Video

The best way to adjust handling on your 2017 Ford F53 18K chassis is to start with anti-sway bars. I recommend starting in the back with the Roadmaster Rear Anti-Sway Bar for Motorhomes #RM-1139-146. Then I recommend the Roadmaster Front Anti-Sway…

Although your 2011 Thor Hurricane 32A Motorhome is built on the F-53 chassis, not everything for the F-53 will fit. In this case, your only option for front suspension enhancement is the Timbren Front Suspension Enhancement System #TFFF53B. There are…

For your Thor ACE 30.3 Motor coach, I recommend the Timbren Rear Suspension #TFRF53A and front suspension #TFFF53B. This will help with the stability of your coach and act as a shock absorber as well. They help reduce body roll and compensates for…

Believe me when I tell you, of all the questions we get, this is definitely NOT a stupid one, and to answer your question, both the Timbren Rear Suspension Enhancement System #TFRF53A and Timbren Front Suspension Enhancement System #TFFF53B will fit…

I did some checking and it looks like your 2016 Jeep Rengade can be towed with a tow dolly like the Roadmaster part #RM-2050-1 only if it's front wheel drive. It cannot be flat towed with all 4 wheels down in any configuration. Dolly towing has…

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…