SMI Stay-IN-Play DUO Braking System Installation - 2016 Jeep Wrangler Unlimited Video

Correct, you do need a working battery for activation and continual operation of the Demco SBS Stay-IN-Play DUO Supplemental Braking System #SM99251 and Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor #DM86VR. If…

By law most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot #BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is…

The Universal Group 6-Leaf Double-Eye Spring #e64SR referenced in your question is designed for 7,000 pound axles like what you have on your trailer. Most likely this will work great as a replacement, however I cannot be sure that it is a direct…

That's a good question, and the reason the Roadmaster InvisiBrake Supplemental Braking System #RM-8700 is not a very good option if you will be flat towing in mountainous or hilly areas is because it applies the same amount of braking force no…

Are you sure you aren't exceeding the capacity of your trailer? Going with higher rated springs will give you additional spring capacity but will not increase the overall capacity of your trailer. The only way going with new leaf springs like…

Yes, the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles #HM56200 and Demco SBS Stay-IN-Play DUO Supplemental Braking System #SM99251 would be compatible with your 2008 Jeep Wrangler. That being said, I'm not a big fan of the plug in…

Both tow bars you referenced will work with the Blue Ox base plate kit part #BLU93FR that you just bought. The biggest difference will be that the Avail part #BX7420 is designed to allow for better maneuverability in tight turns. This is accomplished…

The SMI Stay-IN-Play DUO #SM99251 is actually a universal supplemental braking system so it will be compatible with your 2018 Jeep JL Wrangler. If you check out the attached installation video of this system on a 2017 Jeep Wrangler you can see that…

There isn't a minimum or a maximum. The #RM-035 Adapter for Jeep D-Ring Bumper Mounts doesn't use the D-rings themselves, they attach to the shackle mounts that the D-rings attach to. You'll also want to find the diameter of the pin hole.…

If your 2013 Jeep Wrangler Unlimited has the standard factory bumper you can use EZ4 base plates #RM-521448-4. If it is a 10th anniversary addition but does NOT have the American Expedition Vehicles bumper you can use #1444-1. If it is a MOAB…

I consulted an online copy of the 2013 Jeep Wrangler Unlimited Owner's Manual, and found that the information regarding flat towing procedures begins on page number 532. The procedures outlined make no mention of what position the key needs to be…

According to my research, the 2016 Colorado/Canyon with the factory 7-way won't have a plug under the dash for installing a brake controller, but there will be bare tow package wires that you can wire the brake controller directly to. The tow…