Roadmaster Reflex Steering Stabilizer Installation - 2017 Newmar Canyon Star Motorhome Video

There are 2 sets of instructions for the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM82RR. One for the steering stabilizer and one for the custom brackets. The instructions for the stabilizer is just a page with some information…

I can confirm that the Roadmaster Exact Center Steering Stabilizer with Custom Brackets for Ford F-53 Chassis #RM36RR is in fact correct for your 2022 Coachman Pursuit 31TS on a 2021 Ford F-53 chassis. Per Roadmaster's guidance, you will also…

If your motorhome has a factory steering stabilizer you'd need to remove it before installing a Roadmaster Exact Center like the #RM82RR. This will function much better than the current stabilizer.

Yes, the Roadmaster Exact Center Steering Stabilizer with Custom Brackets for Ford F-53 Chassis, #RM36RR will have a installation instructions included. I also highly recommend the Roadmaster Anti-Sway Bars, #RM-1139-146 for the rear and,…

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for, please just let me…

The Roadmaster #RM-1139-140 and #RM-1139-148 are both replacement anti-sway bars for a Ford F550 or F53 Class A motorhome chassis. Both bars are 1-3/4 inches in diameter. The #RM-1139-140 fits models with a GVWR of 22K-24K, and the #RM-1139-148 fits…

For your 2024 Ford F-53, I recommend checking out the Timbren Front Suspension Enhancement System #TFFF53B for the front, and the Timbren Rear Suspension Enhancement System #TFRF53A for the rear. These kits do not require drilling, will replace your…

There is a suspension enhancement option for your 2021 Entegra Vision XL built on a Ford F-53 chassis, but I verified with the manufacturer that the steering stabilizer only fits if you have at least a 24,000 lb GVWR. You're not out of luck…

I found the online version of the install instructions for the Exact Center stabilizers like the #RM47MR. What's fun is that just when you think you have found the correct step to address your problem it tells you to continue to the next step.…