Fit Of The Roadmaster Exact Center Steering Stabilizer On A 2022 Coachman Pursuit 31TS

Question

Question:

Regarding the RM36RR for a 2021 F53 Chassis on a 2022 Coachmen Pursuit 31TS with the V8: As quoted: The chassis manufacturer year is the correct info to pick out the steering stabilizer. Since you have a 2020 Ford F-53 chassis the correct steering stabilizer youd want is the Roadmaster Exact Center part # RM36RR. This specific stabilizer fits all GVWR sizes for... The info on this product does not address the handlebar steering rod on the Coach on the 2021 chassis. Are these brackets applicable to both the straight and handlebar control arms? the page says it is not confirmed for this vehicle. Can you confirm? Just looking for some confidence for my purchase.

asked by: Bruce A

0

Expert Reply:

I can confirm that the Roadmaster Exact Center Steering Stabilizer with Custom Brackets for Ford F-53 Chassis # RM36RR is in fact correct for your 2022 Coachman Pursuit 31TS on a 2021 Ford F-53 chassis.

Per Roadmaster's guidance, you will also need the Custom Mounting Brackets for Roadmaster Reflex Steering Stabilizer # RM92VR to install this steering stabilizer.

expert reply by: Bryce D

0

Answer 1

The correct steering stabilizer for your 2000 Ford F-53 with 20,500 GVWR is the Roadmaster Exact Center Steering Stabilizer with Custom Brackets for Ford F-53 Chassis, #RM36RR.

view full answer...

Answer 2

Yes, the Roadmaster Exact Center Steering Stabilizer with Custom Brackets for Ford F-53 Chassis, #RM36RR will have a installation instructions included. I also highly recommend the Roadmaster Anti-Sway Bars, #RM-1139-146 for the rear and,…

view full answer...

Answer 3

If your motorhome has a factory steering stabilizer you'd need to remove it before installing a Roadmaster Exact Center like the #RM82RR. This will function much better than the current stabilizer.

view full answer...

Answer 4

There are 2 sets of instructions for the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM82RR. One for the steering stabilizer and one for the custom brackets. The instructions for the stabilizer is just a page with some…

view full answer...

Answer 5

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to…

view full answer...

Answer 6

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 7

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 9

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a…

view full answer...

Answer 10

In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for, please just…

view full answer...

Answer 11

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of…

view full answer...

Answer 12

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is…

view full answer...