Pace Edwards Bedlocker Retractable Hard Tonneau Cover Installation - 2022 Ford F-450 Super Duty Video

Since your 2016 Ford F-250 has the shorter 6-3/4 foot bed we would typically recommend going with a sliding 5th wheel hitch to allow you to make tight turns without your trailer hitting the cab of your truck. If you went with the MORryde Orbital…

The correct replacement rails for your Pace Edwards Bedlocker on your 2020 Ford F-450 would be the part #311-BL5145.

You can install a truck bed mat in your 2017 Ford F-250 with the factory 5th wheel/gooseneck prep so long as you trim the mat to allow full metal-on-metal contact of the hitch to the installation rails. There cannot be any part of the mat trapped…

WeatherTech doesn't pre-cut the mat for the bed mounted pucks of the Ford OEM tow prep package, you'll need to cut the holes yourself. As you can see in the photo I've provided, WeatherTech clearly marks where you'd need to trim the…

I have 3 options for you for a spare tire. They are identical wheels but will have 3 different load ratings that you can choose the best for your Jet Ski trailer. Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load…

We have the 24x84 etrailer Cargo Carrier for RV Bumper, #e96ZR. From available online specs, the exterior width of the Wolf Pup is listed at 85". We also have the 64" #e83YR, a 60" wide version under part, #e99049 and a 40"…

Yes, the 24x64 etrailer Cargo Carrier for RV Bumper, #e83YR is the built the same as the shorter version but with an extension to increase width. From the images you attached, if you remove the spare tire, you can install the 24x40 etrailer Cargo…

Thank you for all of the information! I definitely have some recommendations for you but I do encourage you to get that OEM suspension looked at especially if you think it used to look different prior to your last trip. Any suspension enhancement…

I spoke with Lippert about the Trailer Hitch Receiver for Vanleigh 5th Wheel Trailers part #LC730647 and they said this would work on your 2018 Vanleigh Vilano if the distance between your two frame rails inside to inside is 72". If this…

The 24x40 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500lbs #e99050 is the smallest version of our cargo carriers but we do offer the Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Steel - 200lbs #MNT54FR which is…

I recommend using either a 24x40 etrailer Cargo Carrier for RV Bumper #e99050 or 24x60 etrailer Cargo Carrier for RV Bumper #e99049 and moving the spare tire to either side of the bumper. You can see how the 40" wide carrier is installed with a…

It sounds like you're looking for an RV cargo carrier for an 8" bumper that's 24x36" with a 500-lb capacity. I have a possible solution for you. First, though, the only bumper-mounted cargo carrier we carry that closely matches the…