K Source Universal Clip-On Towing Mirror Installation - 2014 Hyundai Santa Fe Video

Customers compare ks3891 to these similar products

K-Source Universal Towing Mirrors - Clip On - Convex Mirror - Qty 2

$83.40

Products Featured in this Video

How to Install the K Source Universal Clip-On Towing Mirror on a 2014 Hyundai Santa Fe

Today at 2014 Hyundai Santa Fe Limited, we're going to review and install Part Number KS3891. This is the K Source Universal Towing Mirror that clips on. Now we're going to back up to a relatively small trailer, and you can see the difference the towing mirror makes. If we look at the factory mirror on the vehicle, we can barely see the trailer. But when we take a look at our towing mirror, we can… see more >

Info for this part was:

Test Fit:

Joe V

Test Fit:

Cole B

Test Fit:

Shane T

Test Fit:

Randy B

Test Fit:

Hayden R

Test Fit:

Savanna B

Test Fit:

Andrew S

Test Fit:

Brent H

Test Fit:

Shane H

Test Fit:

David F

Test Fit:

Ryan G

Test Fit:

Adam E

Video Edited:

Zack K

Video Edited:

Joshua S

Video Edited:

Jacob T

Video Edited:

Andrew L

Video Edited:

Kathleen M

Video Edited:

Dustin K

Video Edited:

Chris R

Video Edited:

Zach D

Video by:

Andrew K

Video by:

Patrick B

Video by:

Alan C

Video by:

Jonathan Y

Video by:

Robert C

Video by:

Aidan B

Video by:

John S

Video by:

Charles A

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Explore Expert Info

Most Popular Wheel Bearings

How to Choose the Right Trailer Hitch Class

Determining Trailer Tongue Weight

Stability Control for Heavy Duty Vehicles

Rooftop Cargo Carriers

Trailer Maintenance Schedule

Does Rubber Grommet on Side Cameras of Rearview Camera Setup part #RVS-062710 Need to Stay

You could cut off the grommet if you don't want it or you could leave it on the inside of the RV wall. I would use a sealant to keep water out too. The included nuts and bolts are what we used in our install. The sealant part #0160299 would work…

view full answer...

Swivel Trailer Jack with a Wheel for a 2007 Viking Pop-up Camper

The Fulton jack, #F1411300301, is a weld-on application and you will need mounting bracket #P9012-00. The mounting bracket is the part that gets welded to the trailer frame. Any welding should be done by a qualified professional welder. It can be…

view full answer...

Do Trailer Jacks with Two Wheels Make it Easier to Maneuver a Jack on Concrete

Having 2 wheels will provide more surface area/contact with the ground. This could actually make it more difficult to maneuver compared to a single wheel. But two wheels are better than one when not on pavement. A single wheel tends to dig into dirt…

view full answer...

Availability Of 33" Ark Stabilizer Jack And Dimensional Diagrams Of Similar Ark Corner Steadies

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

view full answer...

Lug Nut Torque Chart for Trailer Wheels

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Overall Length of the 24" and 30" Ark Drop Down Corner Stabilizer Jacks

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

view full answer...

Angle of Different Stabilizer Positions for Ark Drop Down Corner RV Stabilizer Jacks

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

What is the Difference Between a Class II and a Class III Hitch?

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

What is the Difference Between a 4-Way and 7-Way Trailer Connector

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

How Much Fender Clearance Does The Brophy Heavy Duty Cable Camper Jacks Offer

We don't currently have any customer submitted photos for the Brophy Heavy Duty Cable Camper Jacks #CX74, but we do for the lower capacity #CJ74, which uses the same lift brackets. From the edge of the tube to the lift bracket is approximately…

view full answer...

Yes, you can! So long as our Kenda Loadstar 5.30-12 Bias Trailer Tire with 12" White Wheel item #AM30820 is the same size and bolt pattern as what's on your Ironton trailer it can be used not only as a spare but also on your trailer with the…

view full answer...