etrailer Trailer Hitch Installation - 2019 Chevrolet Express Van Video

If your 2019 Chevy Express Van does not have any trailer wiring or a hitch there's a strong chance you don't have it but you can verify this by checking the VIN with a Chevy dealer. So for trailer wiring you'd want to start…

On a 2017 Chevrolet Express Van that does NOT have the factory trailer connector a trailer brake controller install will usually be hardwired using our install kit #ETBC7 and a 4-pole harness like #118392. These items allow complete installation of…

The distance between the bolt holes on the Curt Trailer Hitch Receiver #14080 is 39-1/4" center-to-center. I have attached a photo to demonstrate this. Please note that this trailer hitch fits the following: 2002 - 2002 Chevrolet Avalanche 2002…

We do have a Class V trailer hitch receiver that will fit the frame rails of your 2009 Bluebird bus, although they are all weld-on applications as there isn't an option for a heavy-duty hitch that is bolt-on. The options are either a 3" drop…

We may have a hitch for your 2002 Chevy Express school bus but I can't recommend you use the hitch you mentioned as that is for the passenger and cargo van and not a school bus. The only hitch receiver we can recommend for a bus is a universal…

The etrailer.com Trailer Hitch #E98861 will fit your 1997 GMC Savana so long as it is a cargo or passenger van model; if you take a look at the photo of the dimensions of this hitch you can see that the bolt holes are also 40" apart like you…

The Curt #C15320 will fit the frame of your 2014 Chevy Express Cutaway Van Chassis, but in order for the hitch to clear the bumper, the distance between the underside of the frame member that the hitch bolts to and the lowest point of the rear bumper…

For a heavy duty hitch for your 2006 Chevrolet Express 3500 Cutaway I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" #41991-07. The problem with using a hitch like the etrailer Trailer Hitch…

I spoke to my contact at Curt and he informed me that from the center of the mounting holes that are on the mounting bracket on top of the hitch opening to the end of the opening measures 1-1/2 inches.

The distance from the top of the mounting flange or bottom of the truck frame is to the top of the receiver tube on the Curt Trailer Hitch Receiver part #C15312 is 5-5/8".

I spoke with my contact at Curt and I got the measurements between the bolt holes for you. I made a picture that shows the following dimensions: Side to side on center the holes are 40 inches apart. From the hole closes to the receiver to the next…

I have a good solution but there are no custom fit trailer hitches available to match your 2009 E-450 Chassis. Instead the Curt Adjustable Trailer Hitch Receiver part #C13701 is what I recommend. While it does not carry a Class 4 or 5 classification…