Curt Trailer Hitch Installation - 2020 Honda Pilot Video

For your 2021 Honda Pilot Special Edition we have the etrailer hitch part #e98840 that is a confirmed fit and is mostly hidden. It will allow you to keep your current spare as long as it's smaller than the 18 inch wheel size.

In order to retain full functionality of the handsfree liftgate function after the Curt Class III Trailer Hitch part #C13146 has been installed on the 2020 Honda Pilot, you will need to install a sensor relocation kit. It is available directly…

The hardware that is used to install hitches on your 2019 Honda Pilot like the Curt #C13146 is M14x1.50 so that is the size you'd need.

Yes, you can use the Hollywood Racks Sport Rider part #HR1400Z as just a 2 bike rack and then later expand it to a 4 bike rack if you wanted to. I attached a picture that shows the rack split apart for you to check out as well.

The distance from the center of the hitch pin hole to the back of the receiver on the #e98840 is 3-1/2". This means you will be able to use your VelociRAX bike rack with the hitch on your 2020 Honda Pilot. I also asked VelociRAX about this and…

For the lift gate kick sensor with your 2021 Honda Pilot and the Curt Trailer Hitch Receiver #C13146, I have also read that some have not had to relocate the sensor with the Honda kit. But some have also expressed that the system works but not all of…

By auto tailgate sensor I assume you are talking about the hands-free liftgate on your 2019 Honda Pilot Elite. To install the Curt Trailer Hitch #C13146 on a '19 Pilot, you will need to move the sensor if you want to retain functionality of your…

I checked with Curt and they confirmed that their hitch part #C99FR fits all models of the 2021 Toyota Highlander which would include your XSE model that has dual exhaust.

There sure is! After installing the etrailer Trailer Hitch Receiver #e98840 on your 2022 Honda Pilot you will still be able to use your hands-free liftgate sensor, you will just need to move your foot to either side of the receiver and move it in and…

Honda offers a Power Liftgate Sensor Relocation Bracket as part #08U59-TLA-100A for your 2019 Honda CR-V for when you install a hitch like the Draw Tite part #76128 so that the hands free lift gate will still function properly. That said, we've…

Typically, a hitch will prevent the sensors used by the hands free liftgate system from picking up movement directly in the center, but will still pick up movement to one side or the other. We've received varied reports saying that some of the…

Everything I am seeing for your 2020 Honda Pilot shows a 3,500 lb trailer weight capacity which would mean a 350 lb tongue weight capacity. The Curt hitch we have for your vehicle #C13146 that you referenced has quite a bit more capacity than this…