Demco Stay-IN-Play DUO Supplemental Braking System Installation - 2022 Jeep Gladiator Video

I checked with Curt and according to them, the Curt Trailer Hitch Receiver #CU74FR is a fit for all models of the 2020 Jeep Gladiator, including the Sport. You are correct that it will install partially through the ball mount hole in the bumper, as…

Demco stated that the pulsing that you've been experiencing with the Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor - Proportional #DM86VR when your turn signal is activated is normal and usually caused by the…

The auxiliary 12-volt wire that runs from the 7-way connection to 7-way trailer plug will supply 12-volt power from the vehicle to the trailer. The 12 -volt power will allow interior or exterior lights to run that are not wired in to the…

The correct wiring kit will depend on if your 2021 Jeep Gladiator has ParkSense proximity sensors. If you have these sensors you will need the Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights #RM38FR. If you do…

People run maintenance charges through the 7-ways of the vehicle and trailer all the time exactly like how you described. A 10 gauge wire basically like part #10-1-1 run from the battery of the vehicle to the battery of the trailer will give you a…

I would be happy to help you set your 2022 Jeep Gladiator for flat towing. You're going to need a base plate kit, a tow bar, tow bar wiring, supplemental braking system, protective screen, charge line, stop light switch, and a high/low adapter. I…

Since the Roadmaster Tow Defender Protective Screening #RM-4750 fits Demco and Blue Ox base plate and tow bar setups it will work on your setup that has a Demco tow bar and a Blue Ox base plate.

You will not need additional diodes when installing the Demco SBS Stay-IN-Play DUO Supplemental Braking System #SM99251. The 10 amp diode that come with the kit are only needed if your tow wiring harness is not diode-protected. Since yours is not,…

All base plates are going to require you to trim the belly pan of your 2021 Jeep Gladiator - Rubicon. The only way to avoid that would be if you had a bumper with D-Ring Mounts that was rated to flat tow your vehicle. The Roadmaster Direct-Connect…

The requirement of a Roadmaster Brake-Lite Relay Kit for Towed Vehicles #RM-88400 is based solely on the vehicle's wiring and not the supplemental braking system. Since the turn signal overrides the brake signal in a 2022 Ford Escape you would…

To wire in the Coachlink transmitter from the Demco Stay-IN-Play DUO Supplemental Braking System #DM86VR you'll connect the red wire from the transmitter to the cold side of the brake light switch, which would be a white/brown wire for your…

The Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM77VR is only confirmed to fit 2020-2023 Jeep Gladiator Mohave models.