Are Additional Diodes Needed for Demco SBS Stay-IN-Play DUO Supplemental Braking System
Question:
I am going to go with this brake system SM99251. After reviewing several videos for the JK wrangler, none have shown how to wire in 2 diodes that are included with this system. I currently have a plug and play JK harness from Cool Tech that does not require diodes when connected to my motorhome and the lights work fine. I do have LED taillights now installed and I think one video stated the diodes would be required for LEDs. My question is, are these the only diodes I need or do i need those power diode packs?
asked by: Charles P
Expert Reply:
You will not need additional diodes when installing the Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251.
The 10 amp diode that come with the kit are only needed if your tow wiring harness is not diode-protected. Since yours is not, you will install the diodes in-line with the green and yellow wire from the G-Force controller to the green and yellow tow bar wires.
I have added an install video for you to check out as well of the Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251.
Product Page this Question was Asked From
Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- One Time Set-Up
- Fixed System
- Power Assist Brake Compatible
- Hydraulic Brakes
- Demco
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Vehicle Tow Bar Brake System
- Shop: Vehicle Tow Bar Wiring
- Shop: Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional
- Shop: Demco Stay-IN-Play Duo Braking System for RVs w/ Hydraulic Brakes - Wireless Monitor - Proportional
- Shop: Base Plate for Tow Bar
- Video: Demco SBS Stay-IN-Play DUO Braking System Installation - 2019 Ford Fiesta
- Video: SMI Stay-IN-Play DUO Braking System Installation - 2018 Ford F-150
- Shop: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Shop: Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Q&A: Are The Diodes Included In The Demco Stay-IN-Play Needed For Installation
- Shop: Roadmaster Brake-Lite Relay Kit for Towed Vehicles
- Shop: Replacement Roadmaster Coiled Breakaway Cable for Flat Tow Brake Systems
- Shop: Replacement Breakaway Switch Pin for Demco Air Force One and Stay-IN-Play Duo Braking Systems
- Video: Roadmaster Diode 7 to 6 Wire Coil Kit Installation - 2012 Ford F-150
- Q&A: Can Wiring From Stay-IN-Play DUO Controller be Connected to Tow Bar Wiring on 2014 Fiat 500
- Q&A: Installing LED Brake Indicator and Tow Bar Wiring for a 2004 Jeep Liberty
- Q&A: Base Plate Kit, Tow Bar, Safety Cables, Wiring, and Brake System to Flat Tow a 2010 Ford F-150 4X4
- Search Results: dm86vr
- Search Results: rm~88400
- Video: Trailer Wiring Harness Installation - 2008 Ford Ranger
- Shop: Trailer Wiring
- Video: SMI Stay-IN-Play DUO Braking System Installation - 2011 Jeep Wrangler
- Video: Roadmaster Brake-Lite Relay Kit Installation - 2017 Ford F-150
- Video: Roadmaster Universal Diode Wiring Kit Installation - 2017 Ford F-150
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Search Results: base plates
- Q&A: Ignition Key Position When Flat Towing 2013 Jeep Wrangler Unlimited
- Q&A: Trailer Turn Signals Both Blink at the Same Time When Right or Left Turn Signal is Turned On
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated