Clazzio Perforated Leather Seat Cover Installation - 2012 Chevrolet Silverado Video

The Clazzio Custom Seat Covers part #AL-EAGMB7511BK are designed to slip over the factory seat fabric, you wouldn't want to remove them as the covers could then have a loose fit and slide around, the specs for these covers are very exact so you…

I'm happy to confirm that yes, the B&W Patriot 5th Wheel Trailer Hitch w/ Slider #BWRVK3270 with the B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches #BWRVR3200, and the Draw-Tite 5th Wheel/Gooseneck Wiring…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

As you may have already found, 5200 lb, 6000 lb and 7000 lb axles can all use the same components including inner/outer bearings, hubs and brakes. Here are some other things they share in common: Dexter 5200 lb Regular Duty Axle - 0.180 inch tube…

Yes, the B and W Turnoverball rail kit part #BWGNRK1057 that you referenced does fit the 2009 Chevy Silverado 1500 5-1/2 foot bed.

You are going to want either our Bearing Kit #BK2-100 or the Timken Kit #TMK52VR. Both of these kits will give you the inner/outer bearings and races along with a grease seal and cotter pin/D-washer for one hub. You always want to replace the race…

There really should be a flat washer between the outer bearing of your hub and the nut that holds it on. The washer protects the back side of the bearing from the edges and points on the back side of the spindle nut. The Washer For 1 inch Spindle,…

We currently offer 3 different replacement strap hinges, #2008-8, #2512, and #2212, for cargo trailers. I have included a photo showing each of these with their measurements listed. I recommend comparing these measurements to the strap hinges on your…

It is a very good idea to use the a compressor with the Firestone Ride-Rite Air Helper Springs #F2609 on your 2019 Chevy Silverado 1500, as well a no-drill mount kit: - Air Command Compressor System w/ Light Duty Compressor #F2610 - No-Drill Mount…

My technical contact at AirLift confirmed that the minimum pressure setting for triggering automatic re-filling of the air bags by the WirelessONE Compressor #AL25980 can be changed from the typical 5-psi to 10-psi by putting this setting into one of…