Trailer Brake Controller Installation - 2013 Chevrolet Silverado 90885 Video

Your 2013 Chevy Tahoe does not have a factory brake controller plug under the dash, so a custom wiring adapter like the Tekonsha #3026-S that you referenced cannot be used to install a brake controller. With that being said, if your Tahoe is…

When a trailer with electric brakes is connected to a vehicle that has a brake controller that brake controller is sensing the draw of the brake magnets by sending back a small amount of voltage on the blue wire. The brake controller also…

You can easily install an aftermarket controller in your 2013 Chevrolet Silverado 3500 that is compatible with your trailer's electric-over-hydraulic (EOH) brakes. The linked article illustrates the process of wiring in a EOH-compatible…

One of the great features of the Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR is the versatility when it comes to mounting the control knob. Most brake controllers need to be mounted a specific way with the controls on the face of it. Since…

You'd want to use the 20 amp circuit breaker like #PK54220PL unless your trailer has more than two brake axles. If that's the case you'd want to use the 30 amp breaker #38630.

The Tekonsha P-3, item #90195, is an excellent brake controller. Your brake controller wiring will be under the dash below the steering column a bit to the left. There is no connector so you will not need an adapter. You will connect the wires…

The New Body Style now comes with the wires for the brake controller loose underneath the steering wheel off to the left, so there is no adapter necessary. All you need to complete your installation is the Tekonsha P-3 Trailer Brake Controller, item…

I would recommend you install it below and to the right of the steering wheel, on the lower dash piece that will be nearest to your right knee. Check out the picture I attached to see this area. I attached installation instructions as well as an…

Actually to install the Prodigy P3 Brake Controller part #90195 in your 2007 Chevy Tahoe you don't need an install adapter. There are 4 blunt cut wires under the dash that will allow you to wire the controller directly to your vehicle. GM did not…

In order to install the Tekonsha Prodigy P3 Trailer Brake Controller part #90195 on a 2001 Chevrolet Tahoe with factory tow package you'll need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part #3025-P.

The factory-installed integrated brake controller in your 2013 Chevrolet Silverado uses an OEM connector that is not compatible with aftermarket brake controllers from Tekonsha and others. But since there is wiring in place under the dash to allow…

OEM brake controllers differ from aftermarket controllers in that in addition to getting input from the stop lamp circuit, they also get inputs from the vehicle's PCM, so they're more sophisticated than an aftermarket brake controller which…