Air Lift 1000 Rear Coil Springs Air Helper Springs Installation - 2023 Nissan Pathfinder Video

You will need to look to see if the vehicle has a second higher capacity when used with a weight distribution system. Typically there will be two sets of capacities. Weight carrying (which will be lower) and weight distribution (which will be…

When you use the Bearing Buddy Bearing Protectors like #BB2441, so you do not need to take apart the wheel hub and repack the bearings. The Bearing Buddy Protectors have a spring loaded seal that keeps the moisture and debris out of the bearings.…

The code AUX refers to auxiliary, which is auxiliary power, which should be the Dark Blue wire on your 2003 Chevrolet Trailblazer. This wire will connect to the Dark Blue wire on the brake controller and should be connected to the 7-way as the brake…

I took a look at several pictures of the 2108DS Micro Minnie trailers and they have a regular coupler and not a bottom-mount or underslung style coupler. Your particular model has a 7,000 pound gross trailer weight and dry it weighs 3,900 pounds. The…

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…

Correct, if you didn't connect the bars on the Reese Pro Round Bar Weight Distribution w Sway Control #RE94FR then that wouldn't help out with the leveling situation. The bars have a little bit of sway control built-in but their main function…

To install the Prodigy P3 Trailer Brake Controller #90195 in your 2019 Nissan Pathfinder you can find the brake controller port directly under the dash as in the accompanying photo. This will allow you to plug in the Tekonsha Plug-In Wiring Adapter…

Yes, per the installation instructions, your 2014 Nissan Pathfinder with the Controller Area Network, or CAN Bus system, it is recommended by the manufacturer that you use the 30-amp circuit breaker kit #331-CBK30-EB. This, along with your Redarc…

Since you already have all of the relays from the 4-way install all you need to convert it to a 7-way is the part #118282. This comes with the needed harnesses and the 7-way plug so it would be all you'd need.

I do have the right part for you, but the Replacement Wiring Harness for Tow Ready Nissan Vehicle Wiring Harness #118267 will not work on your 2005 Nissan Titan. The right part will be the Factory Style 7-Way and 4-Way Flat Vehicle End Trailer…

The correct 7-way trailer wiring harness for your 2005 Nissan Pathinder that has the factory 4-way is the kit part #118282. This plugs right in and does not require any wiring or splicing. Since your trailer has brakes you'll need a brake…

Since you already have all of the needed relays from the #C56225 to upgrade to a 7-way all you need is the #118282 and you'd be set!