Lets Go Aero GearDeck Enclosed Cargo Carrier Test Course Video

As long as your GearDeck is pre-2021 the Lets Go Aero Flat Pipe Spine w/ 2" Shank for Pre-2021 TwinTube Platform Cargo Carriers #H01373 will fit.

You are on the right track with your thinking and doing exactly what I would do if I were you. You can swap out the slider base of your Companion for GM rail kit to the fixed base part #BWRVB3710 and in the rearmost head position you'd have…

From the pictures you sent it looks like your setup is overloaded. It is important to remember that the use of an extender like this will reduce the capacity of your hitch by 50%. That means if you have a hitch like the Curt #C13388, your maximum…

There are a couple of primary differences between the Carpod Walled Cargo Carrier #M2200-2201 and the upgraded #M2205-2201. The first difference is that the Carpod #M2205-2201 features a hinged shank that allows you to fold up the carrier against…

We do have a version of the Carpod Carrier with Cargo Bag part #M2205-01-02 available without the cargo bag as part #M2205-2201. It's exactly the same just without the bag!

The Lets Go Aero Flat Pipe Spine w/ 2" Shank for TwinTube Platform Cargo Carriers #H01373 has twin tubes that are 25 inches long. The overall length of the part is 40 inches when you measure from shank to the end of the tubes. I've attached…

It sounds like you aren't correctly testing the brake output setting on your Curt Echo Wireless Brake Controller #C51180. What you need to be doing is driving 25 mph in an open parking lot and then applying your tow vehicle brakes with the brake…

The shipping weight of the B&W Companion OEM 5th Wheel Hitch #BWRVK3305 is 152 lbs so it will be just under that after you remove the packaging. Although it is still pretty hefty, the head unit part #BWRVC3006 can easily be removed off of the…

The correct height setting is going to vary by trailer but you can get there taking some measurements. First make sure your trailer is on level ground and then measure from the ground up to the bottom of the king pin. Then on your truck take a…

The B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter #BWRVK3400 weighs 281 lbs. It can be taken apart in sections though to allow it to be easier to manage.

Yes, the head from your Companion hitch #BWRVK3500 would fit on the base part #BWRVB3705 you also referenced.

Great question! We always recommend going with a slider for a short bed truck just because we don't always know the style of the 5th wheel someone will be towing. Since you'll be towing a newer 5th wheel with your short bed 2022 GMC Sierra…