Curt Towing Starter Kit Road Test Video

We do have everything you need to install a 7-Way on your 2020 Subaru Outback Wagon so you can utilize a brake controller but we need to start off by making sure you have a 4-Way for the basic trailer lighting functions. If you don't already…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The most hidden trailer hitch available for your 2020 Dodge Durango is without a doubt the Draw-Tite Max-Frame Trailer Hitch Receiver #DT38MR. The 2" receiver for this Class III hitch will actually extend out through the bottom of the rear…

We don't have a combo of the Curt Hitch Ball #C40008 and Curt Ball Mount #C45340. The ball mount is extremely heavy-duty, rated up to 17,000 pounds. I think it's safe to assume you don't have a torque wrench rated up to 450 foot pounds…

You're right, the information for getting everything correct is pretty overwhelming but you seem to have it down pretty well! In order to determine the correct rise or drop you need for your ball mount, all you have to do is measure from the top…

I'm not 100 percent sure I know the exact dimension you are referring to by center of the hitch pin hole to where you slide the mount up to the receiver, but I believe you are asking about the hitch pin hole to the rear of the Curt Towing Starter…

Yes, you can use the CE Smith Post-Style Guide-Ons for Boat Trailers #CE27620 on your Multi Sport Trailer #CE48870. There won't be any clearance to attach them to the frame between the light and the fender, but they can be installed on the rear…

In order to choose the correct ball mount you'll need to measure from the ground to the top inside edge of the trailer hitch and then subtract the distance from the ground to the bottom of the trailer coupler while level. If this is where you…

The reason why ball mounts like the #EBMK4 have a different rise and drop measurement is because of the way they are measured. Rise is the distance from the top of the shank to the top of the ball platform when the ball mount is oriented for greater…

Yes, the Curt Trailer Hitch Receiver part #C13264 is a confirmed fit for a 2023 Toyota Tacoma. I verified this with Curt for you. It features a simple bolt-on install with no drilling required. It has a class III rating with 2" opening for use…

For your 2016 Nissan Rogue, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75902 which is a confirmed fit. I've attached a video of this installation for you. You will have no issues pulling a…

The wire that you see in the pictures for the Curt Trailer Hitch, #C11290, is called a fishwire or bolt leader. It is used to pull bolts and other hardware needed for hitch installation into place in hard to reach or otherwise inaccessible places on…