Best 2014 Ford F-150 Hitch Options Video

Thank you for the information you provided, and I'll start by telling you that as a general rule it is a good idea to follow the recommendations of the vehicle manufacturer in regards to towing. Do you HAVE to use a weight distribution system if…

E track like the part #E19148 (5 foot section) would work well for what you are looking to do. People use E track for car haulers all the time and it works well. We even have a wheel strap designed for E tracks, part #EM58523 which will work great.

The trailer hitch I recommend for your 2020 Subaru Forester is the EcoHitch part #306-X7391 because this custom fit hitch has a concealed cross tube which gives it the most hidden look of all of the hitch options we carry. This also gives it the best…

It is absolutely okay for you to use a Class III, 2 inch trailer hitch on your 2019 Subaru Forester. The Draw-Tite Trailer Hitch #76271 is a great option that will give you the stability you are seeking and allow you to use a bike rack; we have had a…

The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could find…

The 2014 Ford F-150 4WD can be flat towed with all wheels down by placing the transfer case in its neutral position and engaging the four-wheel-down towing feature. This flat towing information is noted on pages 206-207 of the online owner's…

The owner's manual for the 2014 Ford F-150 only shows the gross combined weight rating which is the most that the truck and trailer can weigh together. So I checked the towing guide from Ford for the 2014 model year. Capacity is also dependent…

The reason it is listed for trucks that have no factory hitch is due to the installation locations. If you said you are removing your hitch, you will be able to install a replacement hitch like part #C14002. To be able to install a replacement…

To install a snow plow on your 1999 Jeep Wrangler TJ you have two options, one that uses specific brackets to mount to the vehicle or one that mounts to a front mounted trailer hitch receiver. If you want to use one that mounts using a front mounted…

Since your goal is to push a plow with a front hitch for our 1998 Jeep Wrangler you'd want the hitch part #C31028 instead as the Draw Tite #65048 puts the hitch opening too high for a plow like the SnowBear part #SB324-080 to be used. In the…

I attached a picture of the Curt Front Hitch part #C31028 installed on a similar Jeep Wrangler as your 1997 model. I also attached a set of installation instructions for you to check out that are very detailed. The hitch mounts through holes on the…

I went out to our warehouse for you and measured the Draw-Tite Front Mount Trailer Hitch Receiver part #65048. The actual cross tube is 28-1/4" long. The bolt holes are 31" apart on center and the outside to outside flange measurement is…