Review of Westin Bumper - Replacement Step Bumper and Install Kit - 20009-92240 Video

The Westin Diamondstep Bumpers, like #2009-92240, will require that you use the brackets that come with it rather than the existing brackets on the truck. The 92240 part of the part number is that installation kit. The Perfect Match Series, like…

The Replacement License Plate Light Kit #00007153 referenced in your question may work on your 1988 Chevy Silverado c1500 but it will depend on what type of bumper you have installed. This light is specifically designed Surestep or Diamondstep Series…

Yes, the Replacement License Plate Light Kit #00007153 that you referenced will fit in a 1-1/4 inch hole and the clip that comes with it will secure the light to the bumper. Check out the picture I attached to see the dimensions of the clip and…

I would be happy to help! Both the Draw-Tite Class V Trailer Hitch Receiver #DT45508 and the B&W Class V Trailer Hitch Receiver #BWHDRH25230 you were looking at for your 2004 Ford F-250/350 King Ranch will stick out from the bumper slightly like…

I checked with Curt and they sent me the following dimensions based on your picture for the #C15410. Red line measurement 10.55” Yellow Line measurement 5.32” Green Line measurement is 7.5”

Your Curt #C15316 is for the deep drop bumper and has a measurement of just over 9 inches according to my contact at Curt. He said the #C15410 is 5.32 inches from the frame to the top of the crosstube and they don't have anything in between those…

Yes, the B and W Heavy Duty Hitch Receiver, #BWHDRH25230, on your 2008 Ford F250 would be strong enough to handle your boat as long as it's tongue weight is 1600 pounds or less when fully loaded. Just a reminder, you always want to follow the…

The extra long Equal-i-zer shank #EQ90-02-4600 will not affect your trailer towing rating since this is part of a weight distribution (WD) system and it has a tongue weight (TW) range of 600 lbs - 1,400 lbs. Please note that this is labeled as an…

The Equal-i-zer Weight Dist Shank part #EQ90-02-4600 should allow you to tow with the tailgate down on your 2017 Ram 3500. I have attached a photo for you of this shank used with a similar system on a similar truck

Our Draw-Tite weight distribution systems recommend tightening the bolts on the head to 300 lbs/ft.

The best solution we have would be a longer weight distribution shank like the Equal-i-zer part #EQ90-02-4600 that you referenced which is 18 inches overall. This shank is perfectly compatible with your Reese system and is best option for adding…

Weight distribution shanks are pretty interchangeable between different brand systems but I do recommend taking a couple measurements on the existing shank for your Eaz Lift system just to be sure. We don't currently carry Eaz Lift products so…