Tekonsha Custom Fit Vehicle Wiring - Trailer Hitch Wiring - 118344 Review Video

The T-1 Vehicle Wiring Harness you referenced, part #118344 would plug inline into the existing wiring harness behind each of the tail light assemblies on your 2002 Explorer Sport Trac. The lead with the yellow wire is for the drivers side, and the…

Since you already have a 4-way connector on your 2018 Toyota Highlander you need to use one of our adapter kits to convert it to a 7-way. If the trailer doesn't have brakes you only need to power its lights and the battery so you can use part…

The first thing I would check on the Explorer are the fuses (and relays) associated with its trailer wiring. I reviewed an online owner's manual but no information about the fuse box (power distribution box) is included so I suggest that you…

Part #C55344 works for your 2001 Ford F-150. We do not currently have an install video for you to reference, but this is a straight forward install. You remove the driver side tail light, plug in the new harness, drop the rest of the wires down, run…

In the USA a tandem axle utility trailer with a gross vehicle weight rating (GVWR) of 7500-lbs should have brakes installed. Any trailer over 3000-lbs must have brakes on all wheels in most states, but laws do vary. Some states require braked axles…

Yes we do, the correct oil seal you would need is the part #10-56 which I verified has same dimensions as the 295924 that you have now.

If you are looking for the vehicle-side trailer wiring harness for your 2000 Ford van I recommend part #118344. This is an easy installation by plugging into the connection points behind the tail lights on the van. If you need a 7-way connector at…

Thank you for the photo! The Curt T-Connector #C56031 you purchased is the correct replacement wiring harness for your 2005 Ford F-150 without a factory 7-pole connector (only a 4-pole) regardless of the style of connector on the factory harness. The…

I do have a solution that should work for you, but we do not carry any Optronics lights with the style connector you have. You could get a Optronics Trailer Light #STL78RB that you referenced, and to install it you would just want to cut of the…

I have exactly what you need to install a 7-way trailer wiring harness on a 2001 Ford E-350. That said, they don't make a direct plug and play 7-way for this vehicle so you will need to start with a 4-way first like the T-One Vehicle Wiring…

Since your 2000 Ford F-150 Lightning does not have the factory tow package you'd need to go a different route for trailer wiring. You'd want to start with the part #118344 for a 4-way wiring harness. Now if your trailer does not have brakes…

The motor you'd looked at, part #BVD0218-00 is the correct replacement for your range hood. I've confirmed this by forwarding your photo to the folks at Ventline.