Review of Timken Trailer Bearings Races Seals Caps - Replacement LM603011 Race - TMK43FR Video

Products Featured in this Video

Timken Trailer Bearings Races Seals Caps - Replacement LM603011 Race - TMK43FR Review

Hi, there. I'm Michael with etrailer.com. Today we're gonna take a quick look at this Timken replacement race. This is a high quality LM603011 race. You can see it does have that industry standard number printed on the side there. So if you're looking for confirmation that this is gonna work in place of the one that you're needing to replace, if you see that number on that original, you can… see more >

Info for this part was:

Installed by:

Michael B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Explore Expert Info

Most Popular Wheel Bearings

Parts Needed to Add Electric Drum Brakes to a Trailer

Testing Trailer Brake Magnets for Proper Function

Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)

Parts Needed to Add Hydraulic Disc Brakes to a Trailer

Trailer Drum Brakes vs. Disc Brakes: Making the Decision

Adding Electric Over Hydraulic Disc Brakes

Trailer Tire Sizing

How to Adjust Your Trailer Brakes | The Ultimate Guide

Can Titan 7,500 lb Surge Actuator Replace Aero 6000 Kit on Trailer

The Titan actuator part #T63FR that you referenced would work well as a direct replacement for your Aero 6000 surge actuator. Since you have replaced the assemblies already you wouldn't need to replace anything else when installing this actuator…

view full answer...

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Lug Nut Torque Chart for Trailer Wheels

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Can Electric Brakes be Used on a Boat Trailer

Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…

view full answer...

Difference Between Single, Dual and Free Backing Servo Brake Assemblies

The biggest difference between the servo styles that you'll notice is between free backing plates and the others. The free-backing plates will allow your trailer to back up without having the brakes lock up. With surge brakes typically when you…

view full answer...

Mounting Hole Spacing For Dexter DX7.5L A-60 Brake Actuator #DX27FR

The mounting holes for the Dexter DX7.5L A-60 Brake Actuator #DX27FR you were looking at are 3" apart on center.

view full answer...

To get the best braking power for your boat trailer you would want to have disc brakes on both axles. If you happen to be limited to one axle then you would want the rear outfitted. With a 5,000lb boat you likely have two 3,500lb torsion axles. The…

view full answer...

Can Dexter Drum Actuator have Electric Reverse Lock Out Added It

Dexter doesn't put reverse lock outs on their drum brake actuators so you'd need to add the part #DM5404 do a new actuator. The part #DX97FR is just the inner section of an actuator though. For the actuator you'd need the part #DX33FR.

view full answer...

Titan T4500600 Brake Actuator Dimensions

I would be happy to help you. The Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs item #T4500600 you referenced is recommend to be mounted on a 3" wide tongue. It is an industry standard actuator and has an inside…

view full answer...