Reese Gooseneck - Below the Bed - RP30138-26 Review Video

The recommended pin weight for a 5th wheel trailer, even if it has been converted to a gooseneck, is 20% of the loaded weight of the trailer. This is regardless of the vehicle you are towing it with. If you do not already have a gooseneck hitch…

The A series of Curt 5th wheel trailer hitches, such as #C16120, is the newest version and is replacing the Q series. The A series jaws overlap whereas the Q series butt up against each other more than overlap. And the bearing and shaft that the head…

Everything is included to mount the Under-Bed Rail and Installation Kit #RP87FR to your 2017 Ford F-350. The Only additional item you may need is the Inner Frame Brackets for Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Hitch…

The blue wire on a brake controller is output to the trailer brakes. If that wire is not connected the trailer brakes will not be getting any power. If there is a break in that wire somewhere between the controller and the trailer connector then that…

To determine why you do not have any power on the blue brake output wire, I recommend starting at your brake controller. First, make sure the brake controller is on and receiving power. Most brake controllers have 4 wires, blue (brake output to…

If you have a 7-Way on both your trailer and tow vehicle you will first want to make sure that you have a brake controller, like the Tekonsha Prodigy P3 #90195. A brake controller is what is used to send power from the tow vehicle and tells the…

Brake magnets for 12 inch brake assemblies should have an ohms reading that falls within the range of 3.0 to 3.8. The 3.7 ohms reading on your brake magnets does not indicate that the brake magnets need to be replaced. If you are experiencing…

The "Trailer Disconnected" error message on the dash with a factory brake controller is usually related to an issue with the blue brake output wire that runs from the brake controller to the 7-Way connector. The fact that the issue remains…

To cover the easiest things first, make sure that the brake controller output or gain is turned up. If the power is low then the voltage on the blue wire will be low. When testing for voltage make sure to use the manual override and not the brake…

There are a number of reasons why the brakes on your trailer may not be working. Lets start with the easiest things to check. First, check the vehicle and trailer connectors for corrosion. This can cause a short inside the connector and the brake…

The trailer tire and wheel part #AM32182 would work great for you as this is exactly what you have now.

All of the underbed kits for your 2019 Ford F-350 (short bed) are about the same when it comes to pricing so I recommend using the Reese Under-Bed Rail and Installation Kit #RP87FR for a few reasons; the first reason is that this is the exact same as…