Customers compare RP87FR to these similar products
Products Featured in this Video
Jeff: Hello everybody, this is Jeff at etrailer.com. Today, we're going to take a look at this underbed rail and installation kit for the Reese Elite Series Fifth Wheel trailer hitches.Now this is a custom fit part. It is designed to fit the 2017 and newer Ford F250, F350 and F450 Super Duty trucks without the factory prep kit. And on a custom fit… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Reese Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches #RP30868 are not the same puck configuration as the Factory GM puck system. However, they are in the same configuration as the Ford Factory puck System,…
view full answer...The OEM "prep" package just refers to already having 4 puck style mounting points and a gooseneck hitch already installed in your truck, so if you don't already have one then you will want to select the choice for a 2017…
view full answer...There unfortunately are not any aftermarket puck system solutions available for your 1995 Ford F-350, but you can still get the best of both worlds with a B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1100. This hitch will allow you to…
view full answer...The factory prep package can be added to a 2017 Ford F-350 using the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches part #RP87FR. It's the same system that would have come from the factory.
view full answer...A bolt actually runs through the center of the #116517 which then holds it to the crossmember of the Elite rail kit. I attached a picture that shows how it all goes together.
view full answer...When adjusting the arms of the #BWRVK3305, you have the option of setting up so the king pin will sit 3 inches forward or 1 inch forward of the axle. I'd set it up at the tallest height, 18-3/4 inches above the floor of the truck bed and 1 inch…
view full answer...Yes, we do. What you are describing sounds like the Inner Frame Brackets for Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Hitch item #RP27FR. I have attached a picture below. These come welded to the frame exactly where you…
view full answer...The only differences between the Demco eZ-Latch Couplers #DM37ZR and #DM14793-81 is that the former has integrated loop holes for installing safety chains and a about a 2" drop while the latter doesn't come with provisions for attaching the…
view full answer...So long as you have the part number 68220 Sidewinder, the correct wedge for the B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package #BWRVK3600 is the following part number: - Sidewinder Wedge Kit for B&W, Demco, and Husky Fifth…
view full answer...To use your Reese 5th Wheel Trailer Hitch #RP30047 with your 2024 Chevy Silverado 2500 you just need this rail kit from Curt: - Curt Custom Fifth Wheel Installation Kit #C16429-204 Since this is a custom kit it matches up to the holes in your frame…
view full answer...To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture). If you don't see these in your…
view full answer...The Under-Bed Rail and Installation Kit #RP87FR has a powder coated finish that will resist rust and corrosion with the aluminum bed on a 2019 Ford Super Duty. For the installation you will need to cut some holes in the bed though so to keep that…
view full answer...