Polar Hardware Enclosed Trailer Parts - Steps - PLR900 Review Video

I contacted Polar and they were reluctant to give me a weight rating for the step part #PLR900 however they were adamant about the fact that it can handle 210 lbs of weight. The step is designed to be used on industrial equipment so it is made of a…

Although the #348776 you'd looked at would do the job, going with a winch that has a higher capacity than what you actually need is a good idea. The winch won't need to work as hard. With this in mind, I'd recommend the #315-W2000D from…

We have a winch that will work to replace your Shelby 5407B but we no longer have a replacement handle for you. I recommend part #DL14627 which is a Dutton-Lainson single speed winch rated for 1,800 pounds. The specs are similar to the Shelby.

Sounds like you are looking for the #CE27608PG which is a single upright post that does not have the PVC pipe on it.

Replacement Velcro strip #A60270 does not have an adhesive back. It fits into a channel on the side rails on Access Tonnosport and Vanish tonneau covers. If you can tell me which tonneau cover model you have I can determine if we have the replacement…

The Truxedo #A60270 is the hook portion of the Velcro fastener, and is held on by self tapping screws that attach the strip to the side rail. As long as its one inch width fits in the available channel and the Velcro sewn into the tarp is the loop…

The HitchMate Boat Trailer Step #HE4036 does only come as powder coated steel. This will offer corrosion resistance, but it will also need to be kept clean to keep this up. We do have a galvanized step available, but it is a different design. The…

For the Curt Securelatch adjustable ball mounts like part #CU47FR we have replacement balls like the part #CU67FR for a 2 inch ball or the part #CU77FR for the other popular size of 2-5/16 inch. The included ball is a 2 inch ball. The shank diameter…

You have two options for the roof racks for the camper. If you have 90 degree, squared edges on your camper, you can use the SportRack Pop-Up Camper, part #SR1020. This has a 200 pound weight capacity and will telescope to your camper's roof…

We sure do! You are looking for the Curt SecureLatch Pintle Hook and Mount with 2" Ball - 2-1/2" Hitches - 20,000 lbs #CU4759FR which includes the 2" ball you were looking for. I included a video showing the Curt SecureLatch being…

The best option we have for you is the 3-Leaf Double-Eye Spring part #e84SR with the Single-Axle Trailer Hanger Kit part #APS4. This option will replace the leaf springs and leaf spring hanger brackets which is needed because the new double eye leaf…

The Pack-Em Ladder Rack Bracket Kit can be mounted on a trailer with a flat top and a rain gutter. You will want to make sure that the bracket is mounted to the header on your trailer. This header will provide additional support for the ladder rack.…