Review of Performance Tool - Hand Tools - 11 Piece SAE Impact Scoket Set - PT58VR Video

Products Featured in this Video

Performance Tool - Hand Tools - 11 Piece SAE Impact Scoket Set - PT58VR Review

Jeff: Hello, everybody. This is Jeff etrailer.com. Today, we're going to take a look at this 11 piece half-inch drive SAE impact socket set. Now these sockets, they are drop-forged chrome-vanadium steel construction for strength and durability. If you notice they have a corrosion and oil resistant black manganese phosphate finish on them. And also… see more >

Info for this part was:

Installed by:

Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Explore Expert Info

Most Popular Wheel Bearings

Trailer Tire Sizing

5 Things to Know About Weight Distribution Hitches

Brake Controller 7- and 4-Way Installation Kit (ETBC7)

How to Measure for Trailer Hitch Drop

2 Steps for Finding the Right Weight Distribution Hitch Size

How to Choose the Right Trailer Hitch Class

Determining Trailer Tongue Weight

7 Common Questions Everyone Has About Trailer Tires

Which Sway Control Hitch is Right For Your Trailer?

Trailer Maintenance Schedule

Lug Nut Torque Chart for Trailer Wheels

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

What is the Difference Between a Class II and a Class III Hitch?

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

What is the Difference Between a 4-Way and 7-Way Trailer Connector

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Can Blue Ox SwayPro Weight Distribution be Used With Equal-i-zer Weight Distribution Shank

Hi Robin, Yes, you can absolutely use the 2" Equal-i-zer Weight Distribution Shank #EQ90-02-4600 with the Blue Ox SwayPro Weight Distribution #BXW2000. The hole spacing on the Equal-i-zer shank is the same as the Blue Ox shank which is why they…

view full answer...

Easiest Weight Distribution Hitch w/ 2-1/2" Shank to Connect/Disconnect Towing Grand Design Trailer

Hi there Ryan; thanks for the question and the easiest weight distribution hitch to connect and disconnect after initial set up is the B&W Continuum, with the right one for your 2-1/2" hitch being the following: - B&W Continuum Weight…

view full answer...