Review of JR Products RV Kitchen - Cabinet Catch - 37270225 Video

Yes, the Phoenix USA Front Hub Cover w/ Pop Out - 8 on 275mm - 33mm Lug Nuts - ABS Plastic, part #PXQ822F, should fit with no problem. I have included a product description and a video review link below.

I reached out to my contact at Phoenix USA and the Phoenix USA Front Hub Cover w/ Pop Out - 8 on 275mm - 33mm Lug Nuts - ABS Plastic #PXQ822F you were looking at will work with your 2014 Thor Challenger with 8 lug 22.5" wheels as long as your…

In order to confirm whether the Phoenix USA Front Hub Cover #PXQ820F fits your 8-lug pattern with 30mm nuts, you need to first make sure that you have a bolt pattern of 8 on 275mm. This is the bolt pattern that the #PXQ820F is designed to fit. The…

The correct way to measure a lock cylinder for length is by the threads. The correct way to measure for width is by the two flat spots. Therefore, based on the photo you attached, you will need a 7/8" long lock cylinder like the Camco Cam Lock…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

The difference between load ranges varies based on the tire size and brand. When comparing two tires of the same size and brand, a load range D tire will always have a greater weight capacity and psi rating than a load range C. However, when…

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

Because the face of the magnet rides against the armature (inside) surface of the brake drum, any grooves that had previously been worn into the armature surface will cause the magnet to wear unevenly. For optimal braking performance, you want…

We do have a couple Class V hitch options available for your 2020 F53 and I have 3 options listed below. These will all be rated to 16,000 pounds towing and 1,600 pounds of tongue weight and use a 2" receiver opening. They will all also fit a…