Review of FloTool Automotive Tools - 58 Quart Super Duty Drain Container With Wheels - FT42008 Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I checked the manual and also reached out to Blue Ox to confirm this but found no notes and Blue Ox stated that the Blue Ox Base Plate Kit #BX1739 would be a compatible fit for your 2020 GMC Sierra 3500 (diesel). If you haven't picked out the…

Yes, the Timken Bearing Kit #TMK52VR will fit your 3,500 lb axle as it fits an standard #84 spindle. The only time this kit won't fit with a 3,500 lb axle is if the trailer/axle is made before the 2000's since that's about the time that…

We do indeed have air suspension for your 2024 GMC Sierra 3500HD crew cab truck. You'll want to go with the Firestone Ride-Rite Air Helper Springs (Rear Axle) #F2613. There is also an AirLift branded option, but I personally would stick with…

Lippert does sell the motor separately but unfortunately not the leg unit. If you are needing the leg unit then you will need to purchase the entire rear jack. Thank you for the picture and your description. Between the Replacement #LC305339 and…

If you have the longer Lippert Ground Control jack legs you can convert them to the shorter ones like the part #LC342610 for the left side and #LC428493 for the right side.

If you have the Lippert Ground Control 3.0 then your middle jack is either the 17" Tall #LC342610 or the 19" Tall #LC305339. I'm not sure where you would be able to find a part number but if you check out the attached photo you can take…

For your 2009 Honda CR-V with a naked roof the Thule Wingbar Evo rack part numbers #TH711220, #TH49SC, #TH72KE would be a great option confirmed to fit that's really well made, easy to use and quiet. Then for a canoe carrier the Thule Portage…

The recommended lug nut torque for your 7,000lb axle depends on a few factors like wheel size, stud size etc. Check out the attached photo which shows the torque specs for a variety of applications. I see you were looking at the Dexter Nev-R-Adjust…

The purpose of a battery disconnect is not meant to keep the batteries charged but to protect certain onboard electronics. In your vehicle's case, is meant to keep the Electric Parking Brake disconnected. If the battery is left connected, or the…