Review of Derale Power Steering Coolers - Cooler and Install Kit - D13350 Video

For DC electricity, I can help you out. You can run a 10 gauge wire like #10-1-1 sold by the foot from a 6-way or 7-way connection from the 12V to a deep cycle 12V battery and then run the battery to a ground on the trailer. You can use a solenoid…

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

WF-8735P is a 35-amp panel model. To upgrade to a lithium ready system you will need the Progressive Dynamics #PD4135K Converter/Smart Charger rated for 35-Amp. this system includes a high voltage output to provide full, quick charge for your lithium…

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

According to the instructions for the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4135K, the negative side of your battery will need to be connected to the backside of the converter. I have attached a…

Yes, all you'll need to do is disconnect the three wires running from the converter section in your Progressive Dynamics 4100 #PD4135K from the AC distribution panel (circuit breaker, ground bus bar, neutral bus bar). This will cut the power…

We have the Progressive Dynamics Converter/Smart Charger at 35 Amp, #PD4135K. This is a replacement for WFCO WF-8735 that works with lithium-ion, flooded lead acid, AGM, and gel batteries. Please note the attached product review video and follow the…

I have a solution for you because as you know what you have now cannot charge Lithium batteries. You will need the Progressive Dynamics #PD4135K which is designed to replace your WF-8735P and is compatible with Lithium batteries. When this is…

According to Progressive Dynamics, with the 35 amp Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4135K you will need 8 gauge wire. I have added a link to a video review for you to check out as well.

If you have the Magnetek Power converter, Series 6300 Model 6325, there is not a direct replacement available, most choose to upgrade the entire system at this point. I suggest the Progressive Dynamics RV Power Control Center with AC/DC Panel and…

I spoke with Progressive Dynamics and they informed me that you cannot replace just the converter section and you would need a new panel, the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger part #PD4045KA. The Progressive…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.