Review of Derale 20 mm x 1.5 mm Engine Filter Thread Spin-On Adapter Kit - D15706 Video

We do have replacement bushings for your trailer, but unfortunately the Never Fail bushings have been discontinued and are no longer available. I recommend bronze bushings like the #D014-077-00 or for the 4 pack the #K71-291-00. We also have nylon…

You are not wrong but at the same time you do not want trailer brakes to lock up. The brakes you have, #23-468-469, are self-adjusting but it takes some time for the shoes to extend out far enough for normal braking. This is why we recommend making…

Trailer brakes are not designed to lock up contrary to many comments. If they were not under load and just free spinning on a jack then they should lock up, but when weight is on them and they are rolling you don't want trailer wheels to lock up.…

The MORryde Shackle Upgrade Kit for Tandem Axle Trailers w/ 2-1/4" Shackles & Correct Track #MR58ZR you were looking at may work on your 2018 Highland Ridge Travel Trailer 322RL with Lippert 5200LB axles and the correct track alignment/lift…

As long as eight of your current bolts measure 9/16" Diameter x 3-3/8" long (springs to equalizers) and the other six 9/16" Diameter x 2-7/8" long (equalizers and springs from the hangers) and then your shackles measure…

The MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track comes in two different lengths, part #MR58ZR for 2-1/4" or part #MR98ZR for 3-1/8". Please note, the above are for models with the Correct Track system. For…

Yes. You can use the MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps #MR58ZR without critically changing your trailer's setup. It is important to note that this particular kit is designed to…

The Replacement Wet Shoulder Bolt #MR52HR will replace one of the wet bolts used with the MORryde Suspension Upgrade Kit #MR58ZR on your 2022 Grand Design Imagine 2800BH travel trailer. You should also grab a Bronze Bushing #LC32SV in the event it…

Never Fail Bushings have been discontinued, though they should not be used with wet bolts like the Wet Equalizer Bolt #126B2 or #34007-187-00. The lubricant would actually cause the bushings to degrade so the better course of action would be to use…

I reached out to my contact at Lippert about what might be going on with your Never Fail bushings, like what comes with kit #LC281285, and he said that it sounds like you may be using the Never Fail bushings to push out your bronze bushings. If this…

I reached out to my contact at Progressive Dynamics and he said that the DC terminals on the RV Power Control Center #PD4560K18LS8 will work well with up to 12 gauge wiring. The terminals themselves are rated for a max of 20 amps DC, which is…

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…