B and W Gooseneck - Below the Bed - BWGNRK1308 Review Video

That is dependent if you have the Companion or Patriot model and if it mount to rails or the goose neck mount type. If you do have the Patriot hitch that attaches to standard above-bed rails, then we have the Replacemen Base for B&W Patriot…

If your 2017 Ford F-250 came with the factory 5th wheel and gooseneck prep package then there would be a total of 5 larger holes in the bed. Four of the holes forming a square around one in the center. That one in the center would be the gooseneck…

The best gooseneck hitch we have for your 2012 Ram 3500 is the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1308 for gasoline engines or part #BWGNRK1313 for diesel engines. The RamBox will not have turning clearance issues with…

In regards to the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1308 which is a fit for a 2007 Dodge Ram 2500 MegaCab, you'll need to drill the 4" hole for the gooseneck hitch ball 45-1/2" forward from the edge of…

The Solera 17' Replacement Awning Fabric #LCV000334405 that you referenced will fit as a replacement for standard 17 foot awnings like you have. This fabric does not have a wiring harness built into it for adding a LED strip as normally with this…

At one point the B and W Turnoverball gooseneck part #BWGNRK1308 didn't fit the diesel engine trucks but it's been updated so now it fits both engine styles. I attached an install video for this kit for you to check out as well.

Since Reese is actually who makes the Ford OEM fifth wheel rail kits the correct underbed rail kit you'd need for your 2017 Ford F-250 is the part #RP87FR and you'd be set. This will give you the exact same kit as if you had ordered the truck…

The issue you are having with the gooseneck hitch ball getting stuck in the trailer hitch after sitting is pretty common, especially with the factory pop-in hitch balls that have the latch in the top like the Curt Ball and Safety Chain Loop Kit part…

The main difference between the B and W gooseneck hitch part #BWGNRK1313-5W and the part #BWGNRK1308-5W is the installation kits are designed for different engine configurations. The #BWGNRK1313 is designed for diesel engine models, whereas the…

B and W does have a turnoverball gooseneck hitch that fits your 2010 Dodge Ram 3500 long bed with the part #BWGNRK1308 but the part number you mentioned does not fit. The #BWGNRK1308 does come with everything needed to install on your truck. I…

Both the Draw Tite Hitch #9464-57 and the B and W hitch #BWGNRK1313 that are confirmed for your 2013 Ram 2500 would be an excellent choice. The U-bolt install of the #9464-57 would make the install simpler than having to fishwire installation bolts…

You should be fine but you would want to check the way the exhaust installs on your truck relative to the truck frame. If the exhaust portion that curves up to go over the axle of your truck does not come up higher than the frame members of your…