Expert Review Video:
Towing Mirrors Specs:
Features:
Universal-fit mirrors clamp onto your factory side-view mirrors to extend your lines of sight while you're towing. The length of the bars can be adjusted to position each mirror closer to or farther from your vehicle. Sturdy steel construction.
More Information >Towing Mirrors Specs:
Features:
Custom, power towing mirrors replace the factory mirrors on your vehicle. The mirrors telescope out to extend your lines of sight. The built-in spotter mirrors reduce blind spots. No-drill installation.
Installation Notes:
Additional features, such as LED turn signals, automatic dimming, and puddle lights will be lost, as these mirror replacements do not include such functions
More Information >Towing Mirrors Specs:
Features:
Custom, manual towing mirrors replace the factory mirrors on your vehicle. The mirrors telescope out to extend your lines of sight. The built-in spotter mirrors reduce blind spots. No-drill installation.
Installation Notes:
Additional features, such as LED turn signals, automatic dimming, and puddle lights will be lost, as these mirror replacements do not include such functions
Designed for models with 4 posts
More Information >Videos
for Towing Mirrors
Help Articles
for Towing Mirrors
Expert Answers
for Towing Mirrors
My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...The squeaking noise on your trailer is probably coming from the joints in the suspension creating metal to metal friction. So, unless your original Equa-Flex Cusioned Equalizers are damaged or corroded, what will make the biggest difference is to…
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...Hi Ron; the K-Source Snap & Zap Custom Towing Mirrors #KS48NQ aren't available yet as of May 2024 and we don't have an exact ETA. They are available for pre-order so if you order them now…
view full answer...Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has…
view full answer...The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…
view full answer...In order to install a brake controller on a dump truck you'd first need to start with a 4-way trailer connector and then adapt this to a 7-way so you can hook up a brake controller. I won't have much info for…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...I have added a photo detailing the wiring connections for the Pollack Heavy-Duty, 7-Pole, Round Pin conncetor, #PK11700, see link. This is a SAE J560 compliant connector. The wiring diagram for the vehicle side connector, #PK11720, is pictured…
view full answer...We do offer the Trailer Connector Adapter, #HM47425, which converts a 7-pole round connector to a 7-pole flat connector. This adapter works for tow vehicles with combined taillight wiring, meaning that the turn signals and brake lights run on the…
view full answer...On single axle trailers typically you put the hanger spacing right at 1/4 of an inch shorter than the leaf spring length from eye to eye center. So if you were using the leaf spring part #e54SR that you referenced which measures 25-1/8 inches long…
view full answer...Filter Products (6)
Contact and Help
What our customers are saying:
I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex
Alex
Blowing Rock, NC