2008 Dodge Sprinter Salt Spreader

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

At this time we only know the Replacement Clutch Assembly #3371401150 to work on the following salt spreaders. Air-Flo part number A40032 Henderson part number 51873 Swenson part number 04138-017-00 Hi-Way part number 41719 Meyer part number 61167…

The Stealth hitch part #SH27FRT that fits your 2017 Volvo XC90 is the most hidden option we have and also has the towing capacity you need. We also have the Hidden Hitch part #DT82GR that is also totally hidden but it has a 3,500 lb capacity. We…

The OEM prep package consists of 4 "pucks" in the bed of…

You only need the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector #C59236 if your Crosstrek does not already have a 4 pole at the back. If you already have a 4 pole, then…

For your 20 Foot Outback Enclosed Trailer, the Reese Friction Sway Control Kit - Economy #83660 will use friction to minimize the movement by basically sandwiching the moving bar. This will allow for turning to still happen without issue, but will…

To solve your step issue I recommend the MORryde StepAbove Fold-Down Steps for 23-3/4" to…

I have included a picture that shows what Curt hitch #C13140 looks like when installed on a BMW X1. The picture is from the instructions which I have also linked for you. As you can see the receiver opening is the only part visible beneath the rear…

The Draw Tite part #76170 that fits your 2023 Honda Odyssey Touring has only the hitch opening that hangs below the rear bumper of your vehicle so it would be a really great option that is more discreet and have better ground clearance. Or if you…

So what you need is the correct ball mount rise/drop that will allow your trailer to be towed level. If you did need a ball mount with a 6 inch rise we have the #C45090 though. For hitch balls you would want part #63845 for a 2 inch ball or #63847…

There are 3 soft TruXedo Tonneau covers for the 2003 Dodge Ram short bed. If you have the TruXport, #TX246601 then the replacement cover only is #TX246601-CVR. If you have the Lo Pro QT #TX546601 then the replacement cover only is #TX546601-CVR. If…

Hey John, yes the Tekonsha brake controller install harness part #3050-P is correct for your 2023 Nissan Frontier and would be what you would need to install the Prodigy P2 part #90885. This harness has one end that was designed to fit your truck…