Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Yes, you'd just need to reach out to a qualified welder and have them weld on spring seats like part #TRSS300 to the top side of the Trailer Axle Beam with Easy Grease Spindles #e45GR. It's super common to do for people who have an…
view full answer...Thank you for the extremely detailed information! Sorry Michael but we do not have any axles with those specifications. The closest one we have available is the 5,200 lbs Dexter Trailer Axle Beam item #8327816. It has a 86-1/2" hub face and…
view full answer...Hey John we do have a potential axle option for you. We have axles with the 86.5" hub face, such as the Trailer Axle Beam #e33GR, which is rated for 6,000. This axle has spring seats at 71-1/2", and they are underslung. We are not…
view full answer...Based on the information I could find on your 2023 Jayco Jayfeather 30QB travel trailer it appears you are going to have 4,400lb axles. You are going to need to verify the diameter of your current axles as some manufacturers like Lippert use a…
view full answer...The Dexter Trailer Axle Beam with E-Z Lube Spindles part #8327816-EB will work on your 2018 Grand Design Reflection 303RLS and it comes with a drum that has a 6 on 5-1/2" bolt pattern. All you will need to do is simply move the spring…
view full answer...The brake mounting bolt pattern for the #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles #TRU87FR is 2-13/16" and then the section that fits into the axle tube is 2" and it tapers out to 2-3/8". Attached are…
view full answer...We don't have an exact match for all of your measurements but you can use the Dexter Trailer Axle Beam #8327816 as a replacement. This is 86-1/2" long so it will stick out 1/4" more on either side of your trailer, something…
view full answer...Hey James, dimensionally the Buyers Products hitch plate part #3371809061A will match up to the frame rails of your International but beyond that most likely would need to get welded in place as the holes wouldn't line up.
view full answer...It is highly recommended that the spring seat be at minimum tack welded to the axle. There have been issues that have resulted from the seat not be welded to the axle. If you do not have access to a welder, I recommend taking the trailer to a local…
view full answer...I got in contact with Lippert, and based off the information they gave me the Dexter Trailer Axle Beam with E-Z Lube Spindles #8327816 is the correct axle replacement.
view full answer...On Dexter axles manufactured after April 2001 you will be able to find the serial number stamped on the rear portion of the axle tube approximately 18" from the passenger side hub. Depending on the condition of the axle you may need some…
view full answer...The C-Channel for Enclosed Trailer #362213-955 has an opening of 1.027". I have included an image below with all the dimensions for this item.
view full answer...Filter Your Search
Contact and Help