Availability Of An Overslung 86.5" Hub Face Axle Beam
Question:
I’m needing to replace a Dexter axle on my RV. Dexter # is 120091, HF 86.5, SC 68.5 overslung configured Serial number 134145207. I need only the bare axle with spindles. No brakes or hubs. Can you supply this axle? Thanks
asked by: John S
Expert Reply:
Hey John we do have a potential axle option for you. We have axles with the 86.5" hub face, such as the Trailer Axle Beam # e33GR, which is rated for 6,000. This axle has spring seats at 71-1/2", and they are underslung. We are not able to weld on spring seats for you here, but we can sell you a few loose spring seats # TRSS300. You would just have to have them welded to the top of the axle tube in your desired location.
This axle is also available in a 5,200 lb capacity # e45GR if that is your preference.
Products Referenced in This Question
Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 6,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 6000 lbs
- Spindles Only
- 71-1/2 Inch Long
- 86-1/2 Inch Long
- No Drop or Lift
- etrailer
more information >
Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 5,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 5200 lbs
- Spindles Only
- 71-1/2 Inch Long
- 86-1/2 Inch Long
- No Drop or Lift
- etrailer
more information >
Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Trailer Suspension Parts
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 3 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Continue Researching
- Q&A: Replacement Axle
- Q&A: Can New Spring Seats Be Welded Onto The Top Of An Trailer Axle Beam
- Search Results: trailer axles
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs
- Shop: Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 5,200 lbs
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 5.2K
- Q&A: Replacement Axle for a 2018 Grand Design Reflection 303RLS
- Q&A: Replacement Option for 5,200 lb Dexter Axle on 2016 Arctic Fox 25R
- Video: TruRyde Trailer Suspension TRSS300 Review
- Video: Review of Dexter Axle Trailer Axles - Leaf Spring Suspension - 8327816
- Search Results: spring mount
- Search Results: axle 5200
- Search Results: spring seat
- Shop: Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Q&A: Is It Required The Spring Seat Be Welded to Trailer Axle
- Q&A: Replacement Axle For 2020 Grand Design Reflection 312BHTS
- Q&A: Where to Find The Axle Serial Number On Dexter Axles Manufactured After April 2001?
- Video: Review of etrailer by AxleTek Trailer Axles - 5,200 lbs 86.5 Inch Long Axle - e45GR
- Search Results: axles
- Search Results: spring seats
- Shop: Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 6,000 lbs
- Shop: Grease Seals 10-36 (pair)
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Video: Redline Trailer Suspension - Leaf Spring Suspension - E4139 Review
- Search Results: sway control only
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Shop: Suspension Enhancement