Truck Bed Cargo Mat Recommendation for a 2013 Chevy 2500HD Long Bed

Question

Question:

I have a 2013 Chevy 2500HD. Does this fit?

asked by: George S

0

Expert Reply:

Yes, I checked with DeeZee and the Truck Bed Mat part # DZ86974 that you referenced has been confirmed to fit your 2013 Chevy 2500HD 8 foot bed without cargo management so it would work well for you.

expert reply by: Jameson C

0

Answer 1

For your 2017 Chevy Silverado 2500 Diesel, I reached out to my contact at Westin and the mounting kit #27-2145 is what you will want. They only have the fit for the gasoline models, but they should work for Diesel as well. They alternatively…

view full answer...

Answer 2

Since running boards run the length of the cab the different cab styles all require different length running boards. This means that extended cab running board fits won't work with crew cab. The #23-1955 that you referenced will fit the crew cab…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

The TorkLift Basic SpringLoad Turnbuckles #TLS9000 actually have an adjustable length of 9 to 13 inches. Just the spring-loaded barrels measure about 4 inches. The two included chains are 24 inches long and 1/4 inch wide. I spoke with my contact at…

view full answer...

Answer 11

While the Sliding B&W Patriot 5th Wheel Trailer Hitch #BWRVK3270 will not fit on the Demco 5th Wheel Rail Adapter #DM6333 I would recommend going with the B&W Companion OEM 5th Wheel Hitch #BWRVK3775. This will fit into the factory puck…

view full answer...

Answer 12

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Truck Bed Cargo Mat Recommendation for a 2013 Chevy 2500HD Long Bed

Product Page this Question was Asked From

Continue Researching