Are CE Smith V-Wing Bolster Bracket Pontoon Trailers # CE26244G Strong Enough for a Pontoon Boat

Question

Question:

This is regarding bunk bracket CE26244G. I have a 24 ft. pontoon boat. motor weighs 285 lbs. i want to use these brackets to rebuild my trailer...8 brackets for 16 ft boards.....4 on each side. do you think that these brackets being an 1/8inch thick will be strong enough and not bend when loading , unloading and transporting the pontoon boat? Thanks in advance for your help.

asked by: Roger T

0

Expert Reply:

Yes, the CE Smith V-Wing Bolster Bracket for Pontoon Boat Trailers # CE26244G that you referenced would be a great option for bolster brackets for your pontoon boat trailer as that is exactly what this product was designed to do. The 1/8 inch galvanized steel construction of this bracket would make it strong enough for your pontoon.

expert reply by: Jameson C

0

Answer 1

As the bunks will be support the weight of your pontoon boat, I always recommend getting them to the end of the transom, or as close as possible. As you mentioned using 14 foot long boards, you will want at least 4 evenly spaced support brackets per…

view full answer...

Answer 2

The CE Smith V-Wing Bolster Bracket for Pontoon Boat Trailers #CE26244G does not carry a specific weight rating. But since it is expressly intended for pontoon trailer use and is made from 1/8-inch-thick galvanized steel in typical use it will be…

view full answer...

Answer 3

Since you are planning on using the CE Smith V-Wing Bolster Brackets, part #CE26244G for a cradle, using boards that hang off the ends by 2-feet may give you plenty of support for your 22-ft pontoon boat. Adding the support to the middle crossbar…

view full answer...

Answer 4

I contacted the manufacturer and one V-Wing Bolster Bracket, Item #CE26244G, should be placed at each frame cross member. Mounting hardware for these brackets is not included so I recommend using a screw and washer like our 3/8 Inch Stainless Steel…

view full answer...

Answer 5

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 6

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 8

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…

view full answer...

Are CE Smith V-Wing Bolster Bracket Pontoon Trailers # CE26244G Strong Enough for a Pontoon Boat

Product Page this Question was Asked From

Continue Researching