Adding V-Wing Bolster Brackets To Cradle For 22-Ft Bennington Pontoon Boat
Question:
This bracket should work on a cradle lift for pontoon also? I have 3 cross bars so could use 6 of these. The cradle is 10foot what length size of 2inch X 6inch would you recommend? Was thinking 14foot to hang off 2foot each end? I have a 22foot Bennington with a 90 Yamaha 4 stroke. CE Smith V-Wing Bolster Bracket for Pontoon Boat Trailers - Galvanized Steel - Qty 1 Code: CE26244G
asked by: Dave S
Helpful Expert Reply:
Since you are planning on using the CE Smith V-Wing Bolster Brackets, part # CE26244G for a cradle, using boards that hang off the ends by 2-feet may give you plenty of support for your 22-ft pontoon boat. Adding the support to the middle crossbar will also ensure you have the most support.
These cradles are made of 1/8-inch thick galvanized steel and come with a slotted mounting hole so you can adjust it when installing.
If you need marine-grade carpeting for your bunk boards I recommend part # CE11349. This roll of black carpet is 18-ft long and 18-inches wide.
![Jeffrey L](https://images.etrailer.com/static/images/catg/people/560_tn.jpg)
Products Referenced in This Question
CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards - Black - 18' Long x 18" Wide
- Boat Trailer Parts
- Bunks
- Trailer Bunk Carpet
- 18 Inch Wide
- 216 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith V-Wing Bolster Bracket for Pontoon Boat Trailers - Galvanized Steel - Qty 1
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- 6 Inch Tall
- 3 Inch Wide
- Galvanized Steel
- 15-1/2 Inch Long
- CE Smith
more information >
Continue Researching
- Shop: CE Smith V-Wing Bolster Bracket for Pontoon Boat Trailers - Galvanized Steel - Qty 1
- Search Results: pontoon bunk bracket
- Shop: CE Smith Narrow V-Wing Bolster Bracket for Pontoon Boat Trailers - Galvanized Steel - Qty 1
- Article: Trailer Lighting Requirements
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE26244G Review
- Article: Trailer Wiring Diagrams
- Q&A: How Many V-Wing Brackets Are Needed To Support A 28-ft Long Pontoon Boat
- Q&A: Weight Capacity of CE Smith V-Wing Bolster Bracket for Pontoon Boat Trailers CE26244G
- Shop: Ratchet Tie Down Straps w/ Storage Bag - 12' Long x 1-1/4" Wide - 830 lbs - Qty 4
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Search Results: bunk board carpet
- Shop: Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels - Galvanized Steel - Qty 2
- Article: Trailer Tire Sizing
- Q&A: What is The Difference Between Having Trailer Axles Above or Below the Leaf Springs
- Q&A: Dimensions of V-Wing Bracket for Pontoon Boat Trailer
- Shop: Replacement Spring Seat for Dexter Trailer Springs Over-Under Conversion Kit - Qty 1
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE11349 Review
- Q&A: Why Do Some Trailer Tail Lights have 3 Wires and Some have 2 Wires
- Q&A: Basic 2-Wire Brake Light Wiring
- Q&A: Replacement Bunk Board Carpeting For a 16 Foot Long Bunk Boards
- Video: CE Smith Pontoon Boat Trailers Roller Style Guide-Ons Review
- Shop: CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long - 1 Pair
- Article: Measuring a Trailer Tire
- Search Results: trailer shackles
- Shop: Suspension Enhancement
- Video: ABS Fasteners Trailer Shackle Bolt Locknut Review
- Search Results: trailer light bracket
- Search Results: 13 inch trailer fenders
- Search Results: over under conversion kit