Replacement Side Lens for Optronics ST2RB, STL2RB, ST3RB, STL3RB, ST4RB and ST5RB Lights

Question

Question:

I need the side marker lens for my right tail light - the DOT number is DOT P2PCA 99 - I cant seem to find it on your site except as what looks like entire tail light assembly. Is this a part you cary and if so whats your part number so I can order it. Thanks very much

asked by: Roger H

0

Expert Reply:

We do have the replacement lens you are looking for. It is # A2RB. It will fit Optronics ST2RB, STL2RB, ST3RB, STL3RB, ST4RB and ST5RB lights.

expert reply by: Michael H

0

Answer 1

We have just what you need. Thanks for sending in the picture as that made it very easy. You are in need of the part #A2RB.

view full answer...

Answer 2

Usually the actual part numbers for a trailer light will be found on the light's base or on its rear surface. The DOT codes you found on the lens are not part numbers, but since you took measurements of the lens we can check for a replacement red…

view full answer...

Answer 3

For the SAE AP2 99 DOT lens we know that the part #A2RB is the correct replacement.

view full answer...

Answer 4

Yes, we have the Replacement Side Marker Lens #A2RB that fits the Combination Tail Light #ST5RB. This will also work on the Passenger Side Light #ST4RB We also have the Light Bulb #A1157B available as well.

view full answer...

Answer 5

We can definitely help you there. Thank you for providing the part number as this makes it very easy to match up. The Marker lens you need is part #A2RB. This should be a direct replacement for your lens. It attaches with 2 screws that are…

view full answer...

Answer 6

Normally the SAE number isn't a reliable way to find the correct replacement as it is not a part number, but from different customers in the past we've determined that the number you listed is for the Bargman Light Lens #34-59-010. This lens…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 10

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 11

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Replacement Side Lens for Optronics ST2RB, STL2RB, ST3RB, STL3RB, ST4RB and ST5RB Lights

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching