Replacement Hub Recommendation for a Calkins Boat Trailer
Question:
I have a Calkins boat trailer, used to carry a small dinghy sailboat. Id like to replace the hubs because they are corroded from being immersed in salt water. Im having difficulty determining what parts to order. Heres what I do know: - The wheels are 5 lug on 4.5 in bolt circle, carrying 5.30 - 12 tires. - The axle diameter is 2 in. Is that sufficient information to order replacement hubs, or should I wait until I have one hub torn down to get more information? I looked for a VIN plate but could not located one. Ive added one pic of my boat sitting on trailer. Thanks for your help.
asked by: John K
Helpful Expert Reply:
The bolt pattern is helpful information for picking out the correct replacement hub, but you need more info.
You will want to remove your current hub to get the bearing numbers off of the bearings in your hub. With that info I can help you pick out the correct hubs.
If you cannot see the part numbers on the bearings or grease seal, then you can take a few measurements on your spindles. I recommend using a precise measuring tool such as a dial caliper because these measurements will need to be precise. I have attached a photo that shows where the part numbers of the bearings and seals will be located and where to measure on your spindle if needed.
I also attached a video that details how to remove and inspect trailer bearings, seals and races.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 4 on 4 - Pre-Greased
- Shop: Replacement Mounting Hardware for CE Smith Roller-Style Guide-On
- Shop: CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 4
- Shop: TecNiq LED Boat Navigation Pole Light - 360 Degree - 12" Long
- Shop: CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long - 1 Pair
- Search Results: calkins trailer parts
- Search Results: calkins boat trailer
- Q&A: Types of Available Boat Trailer Roller Assemblies for Older Calkins Boat Trailer
- Q&A: Recommended Bunk Boards and Brackets for Boat Trailer
- Q&A: Recommended Boat Trailer Guide-Ons for a Calkins Trailer with a 21' Boat
- Q&A: Replacement Keel Roller for my Calkins Boat Trailer
- Q&A: Options to Replace Calkins Double Roller Assembly on Boat Trailer
- Q&A: Replacement Hub Assembly for 1987 Calkin Boat Trailer
- Shop: Trailer Hitch
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Search Results: bearing buddy
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Video: etrailer Trailer Idler Hub Assembly Installation
- Search Results: l44649
- Shop: Brake Controller
- Search Results: l68149
- Shop: Roof Rack
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: DeeMaxx Disc Brake Kit Review