12 Volt Circuit on Factory 7-Way on a 2014 Ford F-150 Does Not have Power

Question

Question:

2014 f 150 new 7pin the + has no power

asked by: Paul C

0

Expert Reply:

It is possible that the fuse and/or relay related to the 12 volt circuit on the trailer connector is missing or blown. You will need to consult the owners manual for your 2014 Ford F-150 to find the locations of all the fuses and relays related to the tow package wiring to check them.

If the fuses/relays are present and working then it could be a connection problem somewhere between the trailer connector and where the 12 volt circuit originates. These can be hard to track down. Since the truck is so new it is likely still under warranty and a dealership could take care of this issue so you can avoid the headache of tracking down a bad connection.

expert reply by: Michael H

0

Answer 1

It sounds like what you are saying is that when you upgraded to the bigger 2019 Ram 2500 that your receiver was too high on the taller truck and now when you connect to your 2018 Keystone Cougar Trailer the coupler is too low. It sounds like you…

view full answer...

Answer 2

The exterior lights on your trailer - stop, turn and tail - and the interior lights will usually be fed by different power sources. On an RV-style 7-way the stop/turn light signals are carried on the pins at the 3-o-clock and 9-o-clock positions…

view full answer...

Answer 3

Since you are not getting the 12V power when your truck is running, you most likely don't have a fuse issue as you stated their isn't a specified fuse or relay in the owners manual. The issue is that your truck is computerized even at…

view full answer...

Answer 4

Your Ford F-150 might have relays related to the tow package wiring and not just fuses. Use the owners manual to find the locations of any relays (or fuses) related to the tow package wiring. The easiest way to see if a relay is bad is to use a known…

view full answer...

Answer 5

The Blue Ox SwayPro #BXW4002 shank weighs in at just under 25 lbs, and the #BXW4003 weighs about 29 lbs.

view full answer...

Answer 6

I do have an option for you, but there is not a version of the Blue Ox TrackPro Weight Distribution w/ Sway Control - 9-Hole Shank - 10K GTW, 1K TW #BLU87FR you were looking at that includes a 11 hole shank. To get the 11 hole shank you will need to…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...