EAZ Lift Weight Distribution System Head is Bent on One Side
Question:
Im towing a 33foot Argosy trailer with a properly sized EAZ Lift round bar weight distributing hitch and Ive found the that plate where the hitch ball mounts is bent down on the right side adjacent to the ball. What would cause this? Ball height was set to factory spec. Trailer looks level when towing. I have no way to measure tongue weight to look for overloading but this problem just appeared after towing for a year or more without issue. What should I be checking to remedy this problem?
asked by: John
Expert Reply:
For weight distribution, one of the most important factors is the tongue weight. You need to determine the tongue weight of the trailer when loaded and ready to tow. Then you need to add the weight of anything loaded behind the rear axle of the tow vehicle to get the total tongue weight.
It does sound like the system is overloaded, possibly very overloaded if part of the head is bending. Usually we see the brackets on the trailer bending or even the trailer frame in some cases. This is the first time I have heard of a head bending.
I believe there is too much tension on the bar on that side and it possibly happened during a turning event or just over time. You will want to stop using the system. Then you will need to confirm the total tongue weight. Finally you will need a system that is appropriate for the trailer tongue weight.
I have included a link to some helpful articles to the right on weight distribution and a link to the systems we carry.
Product Page this Question was Asked From
Replacement Lift Bracket for Reese Weight Distribution Systems
- Accessories and Parts
- Weight Distribution Hitch
- Frame Bracket
- Reese
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Heavy Duty Snap-Up Bracket for Reese Weight Distribution Systems
- Shop: Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 15K GTW, 1,500 lbs TW
- Shop: Chain Hangers for Reese Weight Distribution Systems - Clamp On
- Search Results: reese dual cam hitch
- Q&A: Which Reese Weight Distribution Snap Up Bracket has The Heavy Duty Gussets
- Search Results: weight distribution hitch
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW
- Article: Determining Trailer Tongue Weight
- Q&A: What is the Difference Between Trunnion and Round Bar Weight Distribution Systems
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Equal-I-Zer Weight Distribution is Too Stiff; Can Lighter Bars be Used in the Same Head
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Grease Seals 10-36 (pair)
- Search Results: 68149
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Video: Choosing the Right Brake Controller
- Search Results: 44649
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Shop: Fifth Wheel Hitch
- Search Results: 25580
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Shop: Brake Controller
- Search Results: dust caps