Aluminum Fascia Support on 2009 Infiniti G37 is Welded On and Cant Install Trailer Hitch
Question:
Im in the process of installing the Curt C11499 hitch receiver on my 2009 Inifiniti G37x. Ive drilled the holes, removed the lower appearance panel and cut the lower fascia. When I removed the 4 M8 bolts that are supposed to hold the aluminum fascia support to the bumper, it did not come off. Upon further inspection the fascia support on my vehicle is welded to the bumper at the top in 3 spots! How am I supposed to remove the fascia support to sandwich the hitch mount between that and the bumper if its welded and why was this not mentioned?
asked by: Brian Z
Expert Reply:
I spoke with my contact at Curt. There have been only 2 or 3 cases where customers with the same vehicle have found that the plate in question is welded on. Infiniti seems to have welded only some models but not all.
The solution that other customers have come up with is to use a pry bar to push that panel back and forth to break the welds.
Another option would be to cut the welds but you would likely not be able to get a tool in there to do so. I wish there was a more definitive answer, but this is a rare issue that doesn't have an alternate solution other than to break those welds.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Q&A: Does Bumper Fascia Spacer Need to Be Reinstalled on 2013 Infiniti G37 When Installing Curt Hitch
- Q&A: Hitch Recommendation for a Infinity G37X
- Shop: Exhaust
- Shop: Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
- Shop: Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver (Class II Only)
- Q&A: 2012-2013 Infiniti G37 Sedan Hitch and Bike Rack Recommendation
- Video: Curt Trailer Hitch Installation - 2007 Infiniti G35
- Video: Curt Trailer Hitch Installation - 2012 Infiniti G25
- Q&A: Is The Trimmed Portion of the Fascia Visible When Installing a Trailer Hitch on a 2010 G37xS Sedan
- Shop: Roof Rack
- Shop: Trunk Bike Rack
- Shop: Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Q&A: Receiver Location for a CURT Trailer Hitch on a 2010 Infiniti G37
- Shop: Trailer Wiring
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Search Results: 44649
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Trailer Wiring
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Shop: Brake Controller
- Search Results: dust cap
- Article: Trailer Wiring Diagrams