Will a Bike with 26 Inch Mountain Bike Tires Fit in the Hollywood Racks Sport Rider Bike Rack

Question

Question:

Will this rack accommodate 26inch mountain bike tire/rim? Thanks

asked by: Roddy

0

Expert Reply:

The Hollywood Racks Sport Rider # HR1450Z will accommodate bike tires up to 3 inches wide. The 26 inch wheel will be fine. It is the width you will want to look at. I have included a link to a video review of this rack for you.

expert reply by: Michael H

0

Answer 1

You are correct! When someone invests in a carbon fiber bike we automatically assume that they will want to take extra precautions to protect it. This is why we recommend a rack like the Thule T2 Pro 2-Bike Rack, #TH83JV, which uses a ratcheting arm…

view full answer...

Answer 2

The Thule T2 Pro XTR 2 Bike Platform Rack - 2" Hitches - Tilting #TH83JV will work with your 27.5 inch tires that are 2.4 inches wide. Those tires are not considered fat bike tires. Typically the tires that are considered fat bike tires are 3.5…

view full answer...

Answer 3

Since you have a rather wide wheel base, platform racks are not a good option. Most platform bike racks max out around 50 inches in wheelbase like the Thule T2 #TH83JV you're looking at. One of the only racks that will support your 52 inch…

view full answer...

Answer 4

When we installed a Draw-Tite Class III hitch on a 2014 Forester, we found that the hitch pin hole was recessed under the rear bumper by 7 inches. As you can see in the photo I've edited for you, the closest portion of the bike rack is 8-1/2…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

The Kuat NV 2.0 2 Bike Platform Rack, #NV22G, and the Kuat NV 2.0 Base 2-Bike Platform rack, #BA22B. are both very similar bike racks. Both racks can be expanded to a 4-bike rack, #NA22G add-on for the NV 2.0 and #BA02B for the NV 2.0 Base, and both…

view full answer...

Will a Bike with 26 Inch Mountain Bike Tires Fit in the Hollywood Racks Sport Rider Bike Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching